An investigation of protocol command translation as a means to enable interoperability between networked audio devices
- Authors: Igumbor, Osedum Peter
- Date: 2014
- Subjects: Streaming audio Data transmission systems Computer network protocols Computer networks -- Management Command languages (Computer science)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4689 , http://hdl.handle.net/10962/d1011128
- Description: Digital audio networks allow multiple channels of audio to be streamed between devices. This eliminates the need for many different cables to route audio between devices. An added advantage of digital audio networks is the ability to configure and control the networked devices from a common control point. Common control of networked devices enables a sound engineer to establish and destroy audio stream connections between networked devices that are distances apart. On a digital audio network, an audio transport technology enables the exchange of data streams. Typically, an audio transport technology is capable of transporting both control messages and audio data streams. There exist a number of audio transport technologies. Some of these technologies implement data transport by exchanging OSI/ISO layer 2 data frames, while others transport data within OSI/ISO layer 3 packets. There are some approaches to achieving interoperability between devices that utilize different audio transport technologies. A digital audio device typically implements an audio control protocol, which enables it process configuration and control messages from a remote controller. An audio control protocol also defines the structure of the messages that are exchanged between compliant devices. There are currently a wide range of audio control protocols. Some audio control protocols utilize layer 3 audio transport technology, while others utilize layer 2 audio transport technology. An audio device can only communicate with other devices that implement the same control protocol, irrespective of a common transport technology that connects the devices. The existence of different audio control protocols among devices on a network results in a situation where the devices are unable to communicate with each other. Furthermore, a single control application is unable to establish or destroy audio stream connections between the networked devices, since they implement different control protocols. When an audio engineer is designing an audio network installation, this interoperability challenge restricts the choice of devices that can be included. Even when audio transport interoperability has been achieved, common control of the devices remains a challenge. This research investigates protocol command translation as a means to enable interoperability between networked audio devices that implement different audio control protocols. It proposes the use of a command translator that is capable of receiving messages conforming to one protocol from any of the networked devices, translating the received message to conform to a different control protocol, then transmitting the translated message to the intended target which understands the translated protocol message. In so doing, the command translator enables common control of the networked devices, since a control application is able to configure and control devices that conform to different protocols by utilizing the command translator to perform appropriate protocol translation.
- Full Text:
- Date Issued: 2014
- Authors: Igumbor, Osedum Peter
- Date: 2014
- Subjects: Streaming audio Data transmission systems Computer network protocols Computer networks -- Management Command languages (Computer science)
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: vital:4689 , http://hdl.handle.net/10962/d1011128
- Description: Digital audio networks allow multiple channels of audio to be streamed between devices. This eliminates the need for many different cables to route audio between devices. An added advantage of digital audio networks is the ability to configure and control the networked devices from a common control point. Common control of networked devices enables a sound engineer to establish and destroy audio stream connections between networked devices that are distances apart. On a digital audio network, an audio transport technology enables the exchange of data streams. Typically, an audio transport technology is capable of transporting both control messages and audio data streams. There exist a number of audio transport technologies. Some of these technologies implement data transport by exchanging OSI/ISO layer 2 data frames, while others transport data within OSI/ISO layer 3 packets. There are some approaches to achieving interoperability between devices that utilize different audio transport technologies. A digital audio device typically implements an audio control protocol, which enables it process configuration and control messages from a remote controller. An audio control protocol also defines the structure of the messages that are exchanged between compliant devices. There are currently a wide range of audio control protocols. Some audio control protocols utilize layer 3 audio transport technology, while others utilize layer 2 audio transport technology. An audio device can only communicate with other devices that implement the same control protocol, irrespective of a common transport technology that connects the devices. The existence of different audio control protocols among devices on a network results in a situation where the devices are unable to communicate with each other. Furthermore, a single control application is unable to establish or destroy audio stream connections between the networked devices, since they implement different control protocols. When an audio engineer is designing an audio network installation, this interoperability challenge restricts the choice of devices that can be included. Even when audio transport interoperability has been achieved, common control of the devices remains a challenge. This research investigates protocol command translation as a means to enable interoperability between networked audio devices that implement different audio control protocols. It proposes the use of a command translator that is capable of receiving messages conforming to one protocol from any of the networked devices, translating the received message to conform to a different control protocol, then transmitting the translated message to the intended target which understands the translated protocol message. In so doing, the command translator enables common control of the networked devices, since a control application is able to configure and control devices that conform to different protocols by utilizing the command translator to perform appropriate protocol translation.
- Full Text:
- Date Issued: 2014
A proxy approach to protocol interoperability within digital audio networks
- Authors: Igumbor, Osedum Peter
- Date: 2010
- Subjects: Digital communications , Local area networks (Computer networks) , Computer sound processing , Computer networks , Computer network protocols
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4601 , http://hdl.handle.net/10962/d1004852 , Digital communications , Local area networks (Computer networks) , Computer sound processing , Computer networks , Computer network protocols
- Description: Digital audio networks are becoming the preferred solution for the interconnection of professional audio devices. Prominent amongst their advantages are: reduced noise interference, signal multiplexing, and a reduction in the number of cables connecting networked devices. In the context of professional audio, digital networks have been used to connect devices including: mixers, effects units, preamplifiers, breakout boxes, computers, monitoring controllers, and synthesizers. Such networks are governed by protocols that define the connection management rocedures, and device synchronization processes of devices that conform to the protocols. A wide range of digital audio network control protocols exist, each defining specific hardware requirements of devices that conform to them. Device parameter control is achieved by sending a protocol message that indicates the target parameter, and the action that should be performed on the parameter. Typically, a device will conform to only one protocol. By implication, only devices that conform to a specific protocol can communicate with each other, and only a controller that conforms to the protocol can control such devices. This results in the isolation of devices that conform to disparate protocols, since devices of different protocols cannot communicate with each other. This is currently a challenge in the professional music industry, particularly where digital networks are used for audio device control. This investigation seeks to resolve the issue of interoperability between professional audio devices that conform to different digital audio network protocols. This thesis proposes the use of a proxy that allows for the translation of protocol messages, as a solution to the interoperability problem. The proxy abstracts devices of one protocol in terms of another, hence allowing all the networked devices to appear as conforming to the same protocol. The proxy receives messages on behalf of the abstracted device, and then fulfills them in accordance with the protocol that the abstracted device conforms to. Any number of protocol devices can be abstracted within such a proxy. This has the added advantage of allowing a common controller to control devices that conform to the different protocols.
- Full Text:
- Date Issued: 2010
- Authors: Igumbor, Osedum Peter
- Date: 2010
- Subjects: Digital communications , Local area networks (Computer networks) , Computer sound processing , Computer networks , Computer network protocols
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4601 , http://hdl.handle.net/10962/d1004852 , Digital communications , Local area networks (Computer networks) , Computer sound processing , Computer networks , Computer network protocols
- Description: Digital audio networks are becoming the preferred solution for the interconnection of professional audio devices. Prominent amongst their advantages are: reduced noise interference, signal multiplexing, and a reduction in the number of cables connecting networked devices. In the context of professional audio, digital networks have been used to connect devices including: mixers, effects units, preamplifiers, breakout boxes, computers, monitoring controllers, and synthesizers. Such networks are governed by protocols that define the connection management rocedures, and device synchronization processes of devices that conform to the protocols. A wide range of digital audio network control protocols exist, each defining specific hardware requirements of devices that conform to them. Device parameter control is achieved by sending a protocol message that indicates the target parameter, and the action that should be performed on the parameter. Typically, a device will conform to only one protocol. By implication, only devices that conform to a specific protocol can communicate with each other, and only a controller that conforms to the protocol can control such devices. This results in the isolation of devices that conform to disparate protocols, since devices of different protocols cannot communicate with each other. This is currently a challenge in the professional music industry, particularly where digital networks are used for audio device control. This investigation seeks to resolve the issue of interoperability between professional audio devices that conform to different digital audio network protocols. This thesis proposes the use of a proxy that allows for the translation of protocol messages, as a solution to the interoperability problem. The proxy abstracts devices of one protocol in terms of another, hence allowing all the networked devices to appear as conforming to the same protocol. The proxy receives messages on behalf of the abstracted device, and then fulfills them in accordance with the protocol that the abstracted device conforms to. Any number of protocol devices can be abstracted within such a proxy. This has the added advantage of allowing a common controller to control devices that conform to the different protocols.
- Full Text:
- Date Issued: 2010
- «
- ‹
- 1
- ›
- »