The development of palladium (II)-specific amine-functionalized silica-based microparticles
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241083 , vital:50903 , xlink:href="https://doi.org/10.1080/01496395.2014.978017"
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources.
- Full Text:
- Date Issued: 2015
The development of Palladium(II)-specific amine-functionalized silica-based microparticles : adsorption and column separation studies
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7270 , http://hdl.handle.net/10962/d1020285
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
The Development of Palladium(II)-Specific Amine-Functionalized Silica-Based Microparticles: Adsorption and Column Separation Studies
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Antunes, Edith M , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2015
- Language: English
- Type: Article
- Identifier: vital:7269 , http://hdl.handle.net/10962/d1020278
- Description: The adsorption and separation of platinum(IV) and palladium(II) chlorido species ([PtCl6]2− and [PdCl4]2−) on silica-based microparticles functionalized with ammonium centers based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetriamine (TETA) and tris-(2-aminoethyl)amine (TAEA) were investigated. The functionalized sorbent materials were characterized using SEM, XPS, BET, and FTIR. The sorbents were used in the batch and column study for adsorption and selective separation of [PtCl62− and PdCl4]2−. The adsorption model for both [PtCl6]2− and [PdCl4]2− on the different sorbent materials fitted the Freundlich isotherm with R2 values > 0.99. The S-TETA sorbent material was palladium(II) specific. Pd(II) loaded on the silica column was recovered using 3% m/v thiourea solution as the eluting agent. Separation of platinum and palladium was achieved by selective stripping of [PtCl6]2− with 0.5 M of NaClO4 in 1.0 M HCl while Pd(II) was eluted with 0.5 M thiourea in 1.0 M HCl. The separation of palladium (Pd) from a mixture containing platinum (Pt), iridium (Ir), and rhodium (Rh) was successful on silica functionalized with triethylenetriamine (TETA) showing specificity for palladium(II) and a loading capacity of 0.27 mg/g. S-TETA showed potential for use in the recovery of palladium from platinum group metals such as from solutions of worn out automobile emission control catalytic convertors and other secondary sources. , Original publication is available at http://dx.doi.org/10.1080/01496395.2014.978017
- Full Text: false
- Date Issued: 2015
Adsorption and separation of platinum and palladium by polyamine functionalized polystyrene-based beads and nanofibers
- Authors: Fayemi, Omolola E , Ogunlaja, Adeniyi S , Kempgens, Pierre F M , Antunes, Edith M , Torto, Nelson , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241694 , vital:50961 , xlink:href="https://doi.org/10.1016/j.mineng.2013.06.006"
- Description: Adsorption and separation of platinum and palladium chlorido species (PtCl62- and PdCl42-) on polystyrene beads as well as nanofibers functionalized with ammonium centres based on ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and tris-(2-aminoethyl)amine (TAEA) are described. The functionalized sorbent materials were characterized by microanalysis, SEM, XPS, BET and FTIR. The surface area of the functionalized fibers was in the range 69–241 m2/g while it was 73–107 m2/g for the beads. The adsorption and loading capacities of the sorption materials were investigated using both the batch and column studies at 1 M HCl concentration. The adsorption studies for both PtCl62- and PdCl42- on the different sorbent materials fit the Langmuir isotherm with R2 values >0.99. The highest loading capacity of Pt and Pd were 7.4 mg/g and 4.3 mg/g respectively for the nanofiber sorbent material based on ethylenediamine (EDA) while the beads with ethylenediamine (EDA) gave 1.0 mg/g and 0.2 mg/g for Pt and Pd respectively. Metals loaded on the sorbent materials were recovered by using 3% m/v thiourea solution as the eluting agent with quantitative desorption efficiency under the selected experimental conditions. Separation of platinum from palladium was partially achieved by selective stripping of PtCl62- with 0.5 M of NaClO4 in 1.0 M HCl while PdCl42- was eluted with 0.5 M thiourea in 1.0 M HCl. Separation of platinum from iridium and rhodium under 1 M HCl concentration was successful on triethylenetriamine (TETA)-functionalized Merrifield beads. This material (M-TETA) showed selectivity for platinum albeit the low loading capacity.
- Full Text:
- Date Issued: 2013
The development of catalytic oxovanadium (IV)-containing microspheres for the oxidation of various organosulfur compounds
- Authors: Ogunlaja, Adeniyi S , Khene, Samson M , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Date: 2013
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/241783 , vital:50969 , xlink:href="https://doi.org/10.1016/j.apcata.2013.05.004"
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil.
- Full Text:
- Date Issued: 2013
Imidazole-functionalized polymer microspheres and fibers–useful materials for immobilization of oxovanadium (IV) catalysts
- Authors: Walmsley, Ryan S , Ogunlaja, Adeniyi S , Coombes, Matthew J , Chidawanyika, Wadzanai J U , Litwinski, Christian , Torto, Nelson , Nyokong, Tebello , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246041 , vital:51431 , xlink:href="https://doi.org/10.1039/C2JM15485D"
- Description: Both polymer microspheres and microfibers containing the imidazole functionality have been prepared and used to immobilize oxovanadium(IV). The average diameters and BET surface areas of the microspheres were 322 μm and 155 m2 g−1 while the fibers were 1.85 μm and 52 m2 g−1, respectively. XPS and microanalysis confirmed the incorporation of imidazole and vanadium in the polymeric materials. The catalytic activity of both materials was evaluated using the hydrogen peroxide facilitated oxidation of thioanisole. The microspheres were applied in a typical laboratory batch reactor set-up and quantitative conversions (>99%) were obtained in under 240 min with turn-over frequencies ranging from 21.89 to 265.53 h−1, depending on the quantity of catalyst and temperature. The microspherical catalysts also proved to be recyclable with no drop in activity being observed after three successive reactions. The vanadium functionalized fibers were applied in a pseudo continuous flow set-up. Factors influencing the overall conversion and product selectivity, including flow rate and catalyst quantity, were investigated. At flow rates of 1–4 mL h−1 near quantitative conversion was maintained over an extended period. Keeping the mass of catalyst constant (0.025 g) and varying the flow rate from 1–6 mL h−1 resulted in a shift in the formation of the oxidation product methyl phenyl sulfone from 60.1 to 18.6%.
- Full Text:
- Date Issued: 2012
Oxovanadium (IV)-catalysed oxidation of dibenzothiophene and 4, 6-dimethyldibenzothiophene
- Authors: Ogunlaja, Adeniyi S , Chidawanyika, Wadzanai J U , Antunes, Edith M , Fernandes, Manuel A , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Date: 2012
- Subjects: To be catalogued
- Language: English
- Type: text , article
- Identifier: http://hdl.handle.net/10962/246025 , vital:51429 , xlink:href="https://doi.org/10.1039/C2DT31433A"
- Description: The reaction between [VIVOSO4] and the tetradentate N2O2-donor Schiff base ligand, N,N-bis(o-hydroxybenzaldehyde)phenylenediamine (sal-HBPD), obtained by the condensation of salicylaldehyde and o-phenylenediamine in a molar ratio of 2 : 1 respectively, resulted in the formation of [VIVO(sal-HBPD)]. The molecular structure of [VIVO(sal-HBPD)] was determined by single crystal X-ray diffraction, and confirmed the distorted square pyramidal geometry of the complex with the N2O2 binding mode of the tetradentate ligand. The formation of the polymer-supported p[VIVO(sal-AHBPD)] proceeded via the nitrosation of sal-HBPD, followed by the reduction with hydrogen to form an amine group that was then linked to Merrifield beads followed by the reaction with [VIVOSO4]. XPS and EPR were used to confirm the presence of oxovanadium(IV) within the beads. The BET surface area and porosity of the heterogeneous catalyst p[VIVO(sal-AHBPD)] were found to be 6.9 m2 g−1 and 180.8 Å respectively. Microanalysis, TG, UV-Vis and FT-IR were used for further characterization of both [VIVO(sal-HBPD)] and p[VIVO(sal-AHBPD)]. Oxidation of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was investigated using [VIVO(sal-HBPD)] and p[VIVO(sal-AHBPD)] as catalysts. Progress for oxidation of these model compounds was monitored with a gas chromatograph fitted with a flame ionization detector. The oxidation products were characterized using gas chromatography-mass spectrometry, microanalysis and NMR. Dibenzothiophene sulfone (DBTO2) and 4,6-dimethyldibenzothiophene sulfone (4,6-DMDBTO2) were found to be the main products of oxidation. Oxovanadium(IV) Schiff base microspherical beads, p[VIVO(sal-AHBPD)], were able to catalyse the oxidation of sulfur in dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) to a tune of 88.0% and 71.8% respectively after 3 h at 40 °C. These oxidation results show promise for potential application of this catalyst in the oxidative desulfurization of crude oils.
- Full Text:
- Date Issued: 2012
The development of catalytic oxovanadium(IV)-containing microspheres for the oxidation of various organosulfur compounds
- Authors: Ogunlaja, Adeniyi S , Khene, M Samson , Antunes, Edith M , Nyokong, Tebello , Torto, Nelson , Tshentu, Zenixole R
- Language: English
- Type: Article
- Identifier: vital:7324 , http://hdl.handle.net/10962/d1020574
- Description: The development of poly[allylSB-co-EGDMA] beads containing a tetradentate ligand was achieved via suspension polymerization. The catalyst poly[allylSB-co-EGDMA]-VO was synthesized by reacting VIVOSO4 with poly[allylSB-co-EGDMA]. XPS and EPR were used to confirm the presence of vanadium (V4+) on the beads. The synthesized catalyst (poly[allylSB-co-EGDMA]-VO) was found to have a BET surface area of 22 m2 g−1 and porosity of 135 Å, with the atomic force microscopy (AFM) showing more insight on the porous nature of the beads. Oxidation of thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) was carried out using tert-butyl hydroperoxide (t-BuOOH) as oxidant. An overall conversion of 60%, 82%, 98% and 87% was achieved for thiophene (TH), benzothiophene (BT), dibenzothiophene (DBT) and 4,6 dimethyldibenzothiophene (4,6-DMDBT) respectively at higher (t-BuOOH) to substrate ratio and at a temperature of 40 °C. The efficient oxidation of the various organosulfur compounds presents potential for the possible application of this catalyst in oxidative desulfurization (ODS) of crude oil. , Original publication is available at http://dx.doi.org/10.1016/j.apcata.2013.05.004
- Full Text: false