The evaluation of a handheld Raman Analyser for the good laboratory practise (glp) compliant identification of paracetamol raw materials, in a pharmaceutical manufacturing environment
- Authors: Mavumengwana, Bongeka Nomakhephu
- Date: 2015
- Subjects: Raman spectroscopy , Drugs -- Analysis
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: http://hdl.handle.net/10948/4243 , vital:20570
- Description: The use of a handheld Raman analyser for the positive identification of raw materials in a manufacturing pharmaceutical company was evaluated using paracetamol as test raw material to evaluate whether such a system would meet Aspen’s regulatory requirements. The approach involved subjecting the chosen raw material to identification tests under a variety of conditions so as to evaluate robustness, and specificity of the system. Thus, raw material provided by different suppliers, different packages of one manufacturing batch, and raw materials subjected to different storage conditions were evaluated. Specificity was evaluated by deliberately contaminating a sample of paracetamol with either acetanilide, or 4-aminophenol, or both at varying concentration levels. The results obtained from these investigations showed that the handheld Raman analyser can correctly identify the selected raw material (paracetamol) under a wide range of conditions, but could not correctly identify the presence of the selected contaminants at lower concentration levels (< 10 – 20 mass percent). Finally, a cost-benefit analysis was carried out in which a scenario of an existing FTIR-ATR system is used for the analysis of a specific number of raw material samples per year as opposed to a scenario in which a new handheld Raman analyser has to be purchased, set up, and used for the analysis of the same number of raw material samples. This comparison showed that the handheld Raman analyser had a pay-back time of approximately 6 months and gave a return on investment of approximately the same value as the actual purchase cost.
- Full Text:
- Date Issued: 2015
Development, assessment and optimisation of oral famciclovir formulations for paediatric use
- Authors: Magnus, Laura
- Date: 2012
- Subjects: Drugs -- Dosage forms , Drugs -- Analysis , Capsules (Pharmacy) , Antiviral agents , Pediatrics
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3870 , http://hdl.handle.net/10962/d1018244
- Description: Many Active Pharmaceutical Ingredients (API) such as the antiviral agent famciclovir (FCV) are required for paediatric treatment but are not commercially available in age-appropriate dosage forms. It is common practice to prepare oral liquid dosage forms using commercially available tablets, capsules or powdered API and then dispersing or dissolving the crushed and/or powdered materials in a vehicle that the patient can swallow. Vehicles that are commonly used for this purpose include methylcellulose, syrup or combinations of these carriers where possible or commercially available suspending agents such as Ora-Sweet®, if available, can be used. However, several critical factors are overlooked when manufacturing extemporaneous formulations including, but not limited to, physical and chemical properties of the API, excipients, compatibility, stability and bioavailability issues. A stability-indicating High Performance Liquid Chromatography (HPLC) method for the analysis of FCV was developed and validated according to the International Conference on Harmonization (ICH) guidelines. The method is sensitive, selective, precise, accurate and linear over the concentration range 2-120 μg/ml. The stability of 25 mg/ml FCV formulations was assessed in vehicles manufactured from syrup simplex, hydroxypropyl methylcellulose (HPMC), Ora-Sweet® and an aqueous buffer (pH 6) following storage at 25 °C/60% RH and 40 °C/75% RH over six (6) to eight (8) weeks. The shelf life of the products was calculated as the longest period of storage for approximately 90% of the added FCV to be recovered. Formulations were manufactured using syrup simplex or HPMC with methylparaben and propylparaben individually or in combination and with sodium metabisulphite, ascorbic acid or citric acid as antioxidants. The resultant products were subject to quality control analysis for API content, viscosity, pH and appearance and the resultant data were subject to statistical analysis. The degradation rates were calculated for each product and a degradation profile plotted. The degradation rates of FCV in extemporaneous formulations were compared to those of FCV manufactured using a commercially available suspending agent and a buffered vehicle. FCV undergoes major degradation in the presence of sucrose, as observed for formulations in which the vehicle was syrup and Ora-Sweet®. FCV was found to be most stable when dissolved/dispersed in an HPMC vehicle incorporating sodium metabisulphite and a combination of parabens. The formulation that exhibited the maximum stability was manufactured using an aqueous solution buffered to pH 6. Due to the enhanced stability of FCV when added to a buffered vehicle a formulation in which an HPMC vehicle buffered to pH 6 with sodium metabisulphite, methylparaben and propylparaben was selected for optimisation using a Central Composite Design approach (CCD). In this way it was possible to establish a relationship between input variables such as pH, % w/v HPMC, % w/v antioxidant and % w/v preservative and the responses selected for monitoring by means of response surface modelling. A quadratic model was found to be the most appropriate to describe the relationship between input and output variables. Thirty batches of product were randomly manufactured according to the CCD and analysed to establish the stability in respect of viscosity, pH and the amount of FCV remaining following storage and the data were fitted to models using Design-Expert® software. A correlation between input variables and the responses was best described by a quadratic polynomial model. Analysis of Variance indicated that the response surface models were significant (P-value < 0.0001). The pH to which a FCV formulation was buffered was the most significant factor to effect the % drug content and the ultimate pH of the formulation, while the % w/v HPMC had the most significant effect on the viscosity of the product. The optimum composition for the manufacture of an oral liquid FCV formulation was predicted using the optimisation function of the Design-Expert® software. A low % error of prediction was established, indicating that the model is robust and that RSM is an appropriate formulation optimisation tool as it has a high prognostic ability. A liquid FCV formulation was developed, optimised and found to be suitable for its intended purpose. However further optimisation is required in respect of colourants, sweeteners and/or flavourants. The approach followed is useful in ensuring the development of quality products and can be applied in future.
- Full Text:
- Date Issued: 2012
Solid-phase extraction based sample preparation for the determination of drug and organic pollutant residue
- Authors: Pule, Bellah Oreeditse
- Date: 2011 , 2011-02-08
- Subjects: Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4406 , http://hdl.handle.net/10962/d1006711 , Food contamination , Drugs -- Analysis , Pharmaceutical chemistry , Extraction (Chemistry) , Sorbents
- Description: This thesis presents solid phase extraction (SPE) methodologies based on mixed-mode polymeric sorbents; a mixed mode strong anion exchanger (Agilent SampliQ SAX) and a mixed mode strong cation exchanger (Agilent SampliQ SCX). Furthermore, dispersive-SPE based on a quick, easy, cheap, effective, rugged and safe (QuEChERS) method was assessed for applicability in the determination of drug residues. The mixed-mode polymeric sorbents were evaluated for the simultaneous fractionation of drugs that exhibit diverse polarities with acidic, basic and neutral functionalities in biological matrices (plasma and urine). The polymeric skeleton of these sorbents entails an exchanger group and therefore provides two retention mechanisms, strong cation or anion exchange retention mechanisms with hydrophobic interactions. It was demonstrated that with a sequential elution protocol for sample clean-up analytes were fractionated into acidic, basic and neutral classes. The SAX was employed for analysis of ketoprofen, naproxen (acidic drugs), nortriptyline (basic) and secobarbital (neutral) from urine sample. The SCX was used for fractionating phenobarbital, p-toluamide (acidic), amphetamine, m-toluidine (basic) and acetaminophen (neutral drug) from plasma sample. QuEChERS method was employed for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAHs) from fish fillets and soil; 9 sulfonamides (SAs) from chicken muscles and acrylamide (AA) in cooking oil. The analyte recoveries ranged from 79.6 - 109% with RSDs ranging from 0.06 - 1.9% at three different fortification levels. Good linearity (r2 > 0.9990) was attained for most analytes. The limits of detection and quantification ranged from 0.03 - 0.84 μg/ml and 0.81 - 1.89 μg/ml respectively for analytes in biological samples. LODs and LOQs for analytes in food and environmental samples ranged from 0.02 to 0.39 and 0.25 to 1.30 ng/g respectively.
- Full Text:
- Date Issued: 2011