Graphite: origin, deposits and economics : an exploration study of the Orom Graphite project
- Authors: Van den Berg, Jacobus Petrus
- Date: 2018
- Subjects: Graphite , Ore deposits , Geophysics , Graphite mines and mining Economic aspects Africa, East , Trenches , Project management
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: http://hdl.handle.net/10962/63786 , vital:28489
- Description: Developing exploration projects successfully requires that the Reasonable Prospects for Eventual Economic Extraction (RPEEE) be confirmed and based on the global market perception and trend. The exploration methods applied in the attempt to establish this RPEEE must be based on a key management framework that assures the results, and eventually the conclusion, are obtained with best practical and technical approaches whilst managing the risks and capitalizing on each result. The Orom Graphite project is located within the East African Orogenic belt, a suture zone between the Congo craton and the SLAMIN shield, formed during the formation of Gondwana during the late Proterozoic to early-Phanerozoic era. The closing of the Mozambique ocean, and the eventual collision between the craton and shield, occurred along the paleo-earths equator and migrated towards lower latitudes. This, along with the period’s biodiversity boom, provided the perfect deposition environment for carbonaceous sediments which were later metamorphosed to amphibolite and granulites grade metamorphism, resulting in the carbonization and the eventual graphitization of these carbonaceous sediments. The project is located within a poorly developed part of Uganda with the closest port situated some 1 500 km to the east in Kenya. The poorly developed infrastructure along with probable high logistical cost assigns a low competitivity index if compared to the economic costs of peer projects. However, the potential resources of the Orom Graphite project suggest that the Life of Mine (LOM) can rival the largest resource currently reported within the market. The current market conditions suggest that a possible oversupply of graphite concentrate will dominate the market within the next 4 to 10 years. This suggests that new graphite projects such as the Orom Graphite project are likely to develop into the production phase once the global supply and demand stabilize. This requires the Orom Graphite project to develop from its current scoping study level to a project development study level associated with a definitive feasibility study. To date, the project developed through mapping, reconnaissance drilling, geophysical survey and trenching programs increasing the Net Present Value (NPV) considerably based upon a Cost-Based Valuation approach using Prospectivity Enhancement Multiplier (PEM). The metallurgical studies could however not produce a graphite concentrate product within industrial grade standards. The risk associated with developing the project further into the Mineral Resource Estimation (MRE) phase was quantified and risk was evaluated by implementing a point decision tree and calculating the Expected Monetary Value (EMV). Due to the unfavourable metallurgical results obtained to date, the risk associated with undertaking an additional metallurgical test is considerable with a slight chance of producing a negative project value estimated at 65%. JP van den Berg Rhodes University Overall, the Orom Graphite project contains favourable geological formations with a potential large resource. Market trends indicate that a considerable resource is currently being developed and can supply the global market for the next 4 to 10 years. The project’s location within a landlocked country decreases its economic competitiveness with peer project and the unfavourable, but not conclusive, metallurgical results obtained during the scoping phase do not instil confidence that the project will develop into a productive mine soon. Managing the project development with future graphite demand in mind is the key to determining whether the project still has future value.
- Full Text:
- Date Issued: 2018
Updating the ionospheric propagation factor, M(3000)F2, global model using the neural network technique and relevant geophysical input parameters
- Authors: Oronsaye, Samuel Iyen Jeffrey
- Date: 2013
- Subjects: Neural networks (Computer science) , Ionospheric radio wave propagation , Ionosphere , Geophysics , Ionosondes
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5434 , http://hdl.handle.net/10962/d1001609 , Neural networks (Computer science) , Ionospheric radio wave propagation , Ionosphere , Geophysics , Ionosondes
- Description: This thesis presents an update to the ionospheric propagation factor, M(3000)F2, global empirical model developed by Oyeyemi et al. (2007) (NNO). An additional aim of this research was to produce the updated model in a form that could be used within the International Reference Ionosphere (IRI) global model without adding to the complexity of the IRI. M(3000)F2 is the highest frequency at which a radio signal can be received over a distance of 3000 km after reflection in the ionosphere. The study employed the artificial neural network (ANN) technique using relevant geophysical input parameters which are known to influence the M(3000)F2 parameter. Ionosonde data from 135 ionospheric stations globally, including a number of equatorial stations, were available for this work. M(3000)F2 hourly values from 1976 to 2008, spanning all periods of low and high solar activity were used for model development and verification. A preliminary investigation was first carried out using a relatively small dataset to determine the appropriate input parameters for global M(3000)F2 parameter modelling. Inputs representing diurnal variation, seasonal variation, solar variation, modified dip latitude, longitude and latitude were found to be the optimum parameters for modelling the diurnal and seasonal variations of the M(3000)F2 parameter both on a temporal and spatial basis. The outcome of the preliminary study was applied to the overall dataset to develop a comprehensive ANN M(3000)F2 model which displays a remarkable improvement over the NNO model as well as the IRI version. The model shows 7.11% and 3.85% improvement over the NNO model as well as 13.04% and 10.05% over the IRI M(3000)F2 model, around high and low solar activity periods respectively. A comparison of the diurnal structure of the ANN and the IRI predicted values reveal that the ANN model is more effective in representing the diurnal structure of the M(3000)F2 values than the IRI M(3000)F2 model. The capability of the ANN model in reproducing the seasonal variation pattern of the M(3000)F2 values at 00h00UT, 06h00UT, 12h00UT, and l8h00UT more appropriately than the IRI version is illustrated in this work. A significant result obtained in this study is the ability of the ANN model in improving the post-sunset predicted values of the M(3000)F2 parameter which is known to be problematic to the IRI M(3000)F2 model in the low-latitude and the equatorial regions. The final M(3000)F2 model provides for an improved equatorial prediction and a simplified input space that allows for easy incorporation into the IRI model.
- Full Text:
- Date Issued: 2013
Finite element simulations of shear aggregation as a mechanism to form platinum group elements (PGEs) in dyke-like ore bodies
- Authors: Mbandezi, Mxolisi Louis
- Date: 2002
- Subjects: Platinum group , Magmas , Shear flow , Geophysics , Terrestrial heat flow
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5561 , http://hdl.handle.net/10962/d1018249
- Description: This research describes a two-dimensional modelling effort of heat and mass transport in simplified intrusive models of sills and their feeder dykes. These simplified models resembled a complex intrusive system such as the Great Dyke of Zimbabwe. This study investigated the impact of variable geometry to transport processes in two ways. First the time evolution of heat and mass transport during cooling was investigated. Then emphasis was placed on the application of convective scavenging as a mechanism that leads to the formation of minerals of economic interest, in particular the Platinum Group Elements (PGEs). The Navier-Stokes equations employed generated regions of high shear within the magma where we expected enhanced collisions between the immiscible sulphide liquid particles and PGEs. These collisions scavenge PGEs from the primary melt, aggregate and concentrate it to form PGEs enrichment in zero shear zones. The PGEs scavenge; concentrate and 'glue' in zero shear zones in the early history of convection because of viscosity and dispersive pressure (Bagnold effect). The effect of increasing the geometry size enhances scavenging, creates bigger zero shear zones with dilute concentrate of PGEs but you get high shear near the roots of the dyke/sill where the concentration will not be dilute. The time evolution calculations show that increasing the size of the magma chamber results in stronger initial convection currents for large magma models than for small ones. However, convection takes, approximately the same time to cease for both models. The research concludes that the time evolution for convective heat transfer is dependent on the viscosity rather than on geometry size. However, conductive heat transfer to the e-folding temperature was almost six times as long for the large model (M4) than the small one (M2). Variable viscosity as a physical property was applied to models 2 and 4 only. Video animations that simulate the cooling process for these models are enclosed in a CD at the back of this thesis. These simulations provide information with regard to the emplacement history and distribution of PGEs ore bodies. This will assist the reserve estimation and the location of economic minerals.
- Full Text:
- Date Issued: 2002
A review of the use of geophysics in base- and precious-metal exploration
- Authors: Furnell, R G
- Date: 1981
- Subjects: Geophysics , Geological surveys , Precious metals , Mining geology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5015 , http://hdl.handle.net/10962/d1006144
- Description: The object of geophysical surveys in mineral exploration has traditionally been to detect subsurface geological features, which may reflect the presence of mineralization in depth and, if possible, to measure the dimensions of the causative body. Geophysical methods may also be used to locate extensions to known mineralization and for determining the size, depth and internal characteristics of an orebody. Marked improvements in geological concepts of ore genesis have led to a better appreciation, amongst geologists, of mineralized environments, and this has had an effect on the use of geophysics in recent years. Geophysical surveys are being increasingly used as an aid in environmental reconstructions and the results of regional surveys may be used to provide an indirect guide to ore. One of the main applications of geophysics lies in areas where the orebodies and associated structures are not exposed, as most geophysical measurements are more expensive than surface geological or geochemical surveys.
- Full Text:
- Date Issued: 1981