A self-emulsifying delivery system loaded with efavirenz: The case for flax-seed oil
- Authors: Mazonde, Priveledge
- Date: 2021-10-29
- Subjects: Drug delivery systems , Linseed oil , Antiretroviral agents , HIV (Viruses) , Drug carriers (Pharmacy) , Solubility , High performance liquid chromatography , Efavirenz
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192944 , vital:45283
- Description: The feasibility of incorporating efavirenz (EFV), an antiretroviral agent against HIV into a lipid-based self-emulsifying drug delivery system (SEDDS) containing vegetable oils was investigated. EFV has poor aqueous solubility and is classified under the Biopharmaceutical Classification System (BCS) as a class II compound with highly permeability, its aqueous solubility is less than 10 mg/ml and is defined as a practically insoluble compound with a consequent poor bioavailability of approximately 40%, and erratic dissolution behaviour. SEDDS formulations have been shown to improve the aqueous solubility and consequently the bioavailability of BCS II compounds such as EFV. EFV is a first line antiviral agent used in combination with other agents in antiretroviral therapy (ART). Among the number of NNRTIs approved for use in HIV treatment, EFV is one of the most commonly prescribed drug. Statistical methods and Design of Experiments (DoE) using Response Surface Methodology (RSM), specifically a Central Composite Design (CCD), were used to facilitate the development of a reversed-phase high performance liquid chromatographic (HPLC) method for the quantitation of EFV during formulation product and process development studies. A rapid, accurate, precise and sensitive HPLC method with ultraviolet (UV) detection was developed, optimised and validated for the in-vitro analysis of EFV in a total run time under 10 minutes for the elution of both EFV and loratidine which was used as the internal standard (IS). The method was then successfully applied to the determination of EFV in commercially available tablets. Excipient screening was undertaken using solubility studies and revealed that EFV had highest solubility in flaxseed oil in comparison to soybean, macadamia, grapeseed, sunflower and olive oils. The non-ionic Tween® 80 and Span® 20 were selected as surfactant and co-surfactant, respectively with ethanol co-solvent as they exhibited improved miscibility with co-solvent. Pre-formulation studies were undertaken to investigate the compatibility of the API with excipients and to identify a nano-emulsion region and other emulsion types using pseudoternary phase diagrams. The phase behaviour of crude cold pressed flaxseed oil with the selected non-ionic surfactants revealed an area within pseudo-ternary phase diagrams for different surfactant-mixtures formed gels/semisolid structures which can be exploited for other drug delivery strategies that require such properties. Fourier transform infrared spectroscopy (FT-IR), powder x-ray diffraction (XRD) and Raman spectroscopy were used to identify and assess the compatibility of EFV with chosen excipients. 2 A reduction in the peak intensity was observed for EFV when combined with each hydrophobic/lipid excipient evaluated revealing that there was a marked reduction in the crystallinity of the EFV. A decrease in crystallinity in comparison with the bulk API may indicate that EFV were amorphous or sequestered in a molecular dispersion and exhibited an increased solubility for the molecule. Flaxseed oil was used as the oil phase in studies for the optimization of surfactant mixtures undertaken using DoE, specifically a D-optimal mixtures design with the flaxseed oil content set at 10% m/m was performed. Solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, drug loading capacity, Zeta Potential, droplet sizes and polydispersity index (PDI). Kinetically stable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and assessed. Droplet sizes ranged between 156 and 225 nm, Zeta Potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487. SEDDS formulations of EFV in nano-sized carriers were developed and optimised, in vitro drug release varied with varying amounts of ethanol in the formulation producing formulations that exhibited differently modulated drug in-vitro release profiles that may be further manipulated for better performance and therapeutic outcomes in terms of solubility and possibly bioavailability of EFV when delivered using SEDDS rather than using tablets which in turn may lead to better therapeutic outcomes for patients with HIV. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-10-29
- Authors: Mazonde, Priveledge
- Date: 2021-10-29
- Subjects: Drug delivery systems , Linseed oil , Antiretroviral agents , HIV (Viruses) , Drug carriers (Pharmacy) , Solubility , High performance liquid chromatography , Efavirenz
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/192944 , vital:45283
- Description: The feasibility of incorporating efavirenz (EFV), an antiretroviral agent against HIV into a lipid-based self-emulsifying drug delivery system (SEDDS) containing vegetable oils was investigated. EFV has poor aqueous solubility and is classified under the Biopharmaceutical Classification System (BCS) as a class II compound with highly permeability, its aqueous solubility is less than 10 mg/ml and is defined as a practically insoluble compound with a consequent poor bioavailability of approximately 40%, and erratic dissolution behaviour. SEDDS formulations have been shown to improve the aqueous solubility and consequently the bioavailability of BCS II compounds such as EFV. EFV is a first line antiviral agent used in combination with other agents in antiretroviral therapy (ART). Among the number of NNRTIs approved for use in HIV treatment, EFV is one of the most commonly prescribed drug. Statistical methods and Design of Experiments (DoE) using Response Surface Methodology (RSM), specifically a Central Composite Design (CCD), were used to facilitate the development of a reversed-phase high performance liquid chromatographic (HPLC) method for the quantitation of EFV during formulation product and process development studies. A rapid, accurate, precise and sensitive HPLC method with ultraviolet (UV) detection was developed, optimised and validated for the in-vitro analysis of EFV in a total run time under 10 minutes for the elution of both EFV and loratidine which was used as the internal standard (IS). The method was then successfully applied to the determination of EFV in commercially available tablets. Excipient screening was undertaken using solubility studies and revealed that EFV had highest solubility in flaxseed oil in comparison to soybean, macadamia, grapeseed, sunflower and olive oils. The non-ionic Tween® 80 and Span® 20 were selected as surfactant and co-surfactant, respectively with ethanol co-solvent as they exhibited improved miscibility with co-solvent. Pre-formulation studies were undertaken to investigate the compatibility of the API with excipients and to identify a nano-emulsion region and other emulsion types using pseudoternary phase diagrams. The phase behaviour of crude cold pressed flaxseed oil with the selected non-ionic surfactants revealed an area within pseudo-ternary phase diagrams for different surfactant-mixtures formed gels/semisolid structures which can be exploited for other drug delivery strategies that require such properties. Fourier transform infrared spectroscopy (FT-IR), powder x-ray diffraction (XRD) and Raman spectroscopy were used to identify and assess the compatibility of EFV with chosen excipients. 2 A reduction in the peak intensity was observed for EFV when combined with each hydrophobic/lipid excipient evaluated revealing that there was a marked reduction in the crystallinity of the EFV. A decrease in crystallinity in comparison with the bulk API may indicate that EFV were amorphous or sequestered in a molecular dispersion and exhibited an increased solubility for the molecule. Flaxseed oil was used as the oil phase in studies for the optimization of surfactant mixtures undertaken using DoE, specifically a D-optimal mixtures design with the flaxseed oil content set at 10% m/m was performed. Solutions from the desired optimization function were produced based on desirability and five nanoemulsion formulations were produced and characterized in terms of in vitro release of efavirenz, drug loading capacity, Zeta Potential, droplet sizes and polydispersity index (PDI). Kinetically stable nanoemulsions containing 10% m/m flaxseed oil were successfully manufactured and assessed. Droplet sizes ranged between 156 and 225 nm, Zeta Potential between −24 and −41 mV and all formulations were found to be monodisperse with polydispersity indices ≤ 0.487. SEDDS formulations of EFV in nano-sized carriers were developed and optimised, in vitro drug release varied with varying amounts of ethanol in the formulation producing formulations that exhibited differently modulated drug in-vitro release profiles that may be further manipulated for better performance and therapeutic outcomes in terms of solubility and possibly bioavailability of EFV when delivered using SEDDS rather than using tablets which in turn may lead to better therapeutic outcomes for patients with HIV. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2021
- Full Text:
- Date Issued: 2021-10-29
Preparation, characterization and optimization of carbamazepine based pellets prepared by extrusion-spheronization technique
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
- Date Issued: 2020-04
- Authors: Makoni, Kudzai Gabriella
- Date: 2020-04
- Subjects: Carbamazepine , Pharmacokinetics , Anticonvulsants , Drugs -- Controlled release , Drugs -- Dosage forms , Tablets (Medicine) , Drugs -- Administration , High performance liquid chromatography , International Conference on Harmonisation , Experimental design
- Language: English
- Type: Thesis , Masters , MSc (Pharmacy)
- Identifier: http://hdl.handle.net/10962/140478 , vital:37893
- Description: Carbamazepine (CBZ) is an oral antiepileptic drug (AED) that is prescribed as a first-line treatment for partial seizures. CBZ is a class II compound according to the Biopharmaceutical Classification System (BCS), hence it exhibits low aqueous solubility and high gastrointestinal tract (GIT) permeability...
- Full Text:
- Date Issued: 2020-04
Development and assessment of gastric-retentive sustained release metronidazole microcapsules
- Authors: Makan, Anjana
- Date: 2017
- Subjects: Metronidazole , Drug delivery systems , Helicobacter pylori , High performance liquid chromatography , Gas chromatography , Drugs , Drugs Controlled release
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59240 , vital:27491
- Description: Helicobacter pylori is one of the most common pathogenic bacterial infections and is the leading cause of gastritis, gastroduodenal ulcer disease and gastric cancers. Studies have revealed the prevalence of Helicobacter pylori is high in many countries around the globe. Although Helicobacter pylori is highly sensitive to antimicrobial agents in vitro the clinical eradication rate of the disease is still low. The instability of API at gastric pH, low concentration of API in the gastric mucosa and short gastric residence times are the main reasons for poor eradication rates. The high prevalence rate of this disease necessitates the design and development of gastric-retentive site specific oral dosage forms for the optimized delivery of existing therapeutic molecules and may be an approach to improving the eradication rate of Helicobacter pylori. Metronidazole (MTZ) is a 5-nitroimidazole derivative that exhibits antibiotic and antiprotozoal activity. MTZ is used in combination with other compounds for the treatment of Helicobacter pylori in peptic ulcer disease. MTZ is a potential candidate for inclusion in a sustained release gastric-retentive delivery system that acts in the stomach and since it is unstable in the intestinal/colonic environment enhancing gastric residence time would be a therapeutic advantage. MTZ is a cost-effective therapy that exhibits good anti-microbial activity and has a favourable pharmacokinetic profile. A sustained release gastric-retentive formulation is therefore proposed as an approach to enhance the local delivery of MTZ and improve treatment outcomes for patients infected with Helicobacter pylori. A stability indicating Reversed-Phase High Performance Liquid Chromatography (RP- HPLC) method for the quantitation of MTZ in pharmaceutical dosage forms was developed and optimised using a Central Composite Design (CCD) approach. The RP-HPLC method was found to be linear, accurate, precise, sensitive, selective, and was applied to the analysis of MTZ in commercially available medicines. Preformulation studies were conducted as preparative work prior to manufacture gastric- retentive sustained release MTZ microcapsules. The experiments conducted were tailored for the development of sustained release MTZ microcapsules using a solvent evaporation method. The particle size and shape of the microcapsules was investigated using Scanning Electron Microscopy (SEM). MTZ- excipient compatibility studies were performed using Fourier Transform Infra-red Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and X-Ray Diffraction (XRD). The results revealed that no definite interaction between MTZ and intended excipients to be used for manufacture of MTZ formulations occurred. A solvent evaporation procedure was used for the manufacture of MTZ microcapsules. Preliminary formulations were manufactured using two different grades of Methocel® at various levels. In addition the impact of processing parameters on performance was also investigated. The formulations were assessed in terms of in vitro release, buoyancy, yield, encapsulation efficiency and microcapsule size. Formulation optimisation was undertaken using a CCD approach and numerical optimisation was used to predict an optimised formulation composition that would produce minimal initial MTZ release, maximum MTZ release at 12 hours and maximum buoyancy, encapsulation efficiency and yield. The kinetics of MTZ release from microcapsules was established by fitting in vitro release data to different mathematical models. Higuchi model and first-order model appeared to best fit the data as majority of the formulation batches had highest R2 values for these models. Short-term stability assessment of the optimised formulation was established by undertaking stability studies at 25°C/60% RH and 40°C/75%RH. No significant changes in any of the CQA were observed over 30 days of stability testing. A gas chromatographic (GC) method was developed and validated for the quantitation of residual acetone and n-hexane. The optimised formulation contained 213.60 ppm/g acetone and 25.23 ppm/g n-hexane which are well below the limits set for residual solvents. In conclusion, gastric-retentive sustained release MTZ microcapsules with potential for further development and optimisation have been successfully developed and assessed in these studies. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
- Authors: Makan, Anjana
- Date: 2017
- Subjects: Metronidazole , Drug delivery systems , Helicobacter pylori , High performance liquid chromatography , Gas chromatography , Drugs , Drugs Controlled release
- Language: English
- Type: Master's theses , text
- Identifier: http://hdl.handle.net/10962/59240 , vital:27491
- Description: Helicobacter pylori is one of the most common pathogenic bacterial infections and is the leading cause of gastritis, gastroduodenal ulcer disease and gastric cancers. Studies have revealed the prevalence of Helicobacter pylori is high in many countries around the globe. Although Helicobacter pylori is highly sensitive to antimicrobial agents in vitro the clinical eradication rate of the disease is still low. The instability of API at gastric pH, low concentration of API in the gastric mucosa and short gastric residence times are the main reasons for poor eradication rates. The high prevalence rate of this disease necessitates the design and development of gastric-retentive site specific oral dosage forms for the optimized delivery of existing therapeutic molecules and may be an approach to improving the eradication rate of Helicobacter pylori. Metronidazole (MTZ) is a 5-nitroimidazole derivative that exhibits antibiotic and antiprotozoal activity. MTZ is used in combination with other compounds for the treatment of Helicobacter pylori in peptic ulcer disease. MTZ is a potential candidate for inclusion in a sustained release gastric-retentive delivery system that acts in the stomach and since it is unstable in the intestinal/colonic environment enhancing gastric residence time would be a therapeutic advantage. MTZ is a cost-effective therapy that exhibits good anti-microbial activity and has a favourable pharmacokinetic profile. A sustained release gastric-retentive formulation is therefore proposed as an approach to enhance the local delivery of MTZ and improve treatment outcomes for patients infected with Helicobacter pylori. A stability indicating Reversed-Phase High Performance Liquid Chromatography (RP- HPLC) method for the quantitation of MTZ in pharmaceutical dosage forms was developed and optimised using a Central Composite Design (CCD) approach. The RP-HPLC method was found to be linear, accurate, precise, sensitive, selective, and was applied to the analysis of MTZ in commercially available medicines. Preformulation studies were conducted as preparative work prior to manufacture gastric- retentive sustained release MTZ microcapsules. The experiments conducted were tailored for the development of sustained release MTZ microcapsules using a solvent evaporation method. The particle size and shape of the microcapsules was investigated using Scanning Electron Microscopy (SEM). MTZ- excipient compatibility studies were performed using Fourier Transform Infra-red Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and X-Ray Diffraction (XRD). The results revealed that no definite interaction between MTZ and intended excipients to be used for manufacture of MTZ formulations occurred. A solvent evaporation procedure was used for the manufacture of MTZ microcapsules. Preliminary formulations were manufactured using two different grades of Methocel® at various levels. In addition the impact of processing parameters on performance was also investigated. The formulations were assessed in terms of in vitro release, buoyancy, yield, encapsulation efficiency and microcapsule size. Formulation optimisation was undertaken using a CCD approach and numerical optimisation was used to predict an optimised formulation composition that would produce minimal initial MTZ release, maximum MTZ release at 12 hours and maximum buoyancy, encapsulation efficiency and yield. The kinetics of MTZ release from microcapsules was established by fitting in vitro release data to different mathematical models. Higuchi model and first-order model appeared to best fit the data as majority of the formulation batches had highest R2 values for these models. Short-term stability assessment of the optimised formulation was established by undertaking stability studies at 25°C/60% RH and 40°C/75%RH. No significant changes in any of the CQA were observed over 30 days of stability testing. A gas chromatographic (GC) method was developed and validated for the quantitation of residual acetone and n-hexane. The optimised formulation contained 213.60 ppm/g acetone and 25.23 ppm/g n-hexane which are well below the limits set for residual solvents. In conclusion, gastric-retentive sustained release MTZ microcapsules with potential for further development and optimisation have been successfully developed and assessed in these studies. , Thesis (MSc) -- Faculty of Pharmacy, Pharmacy, 2017
- Full Text:
- Date Issued: 2017
The quantification of fucoxanthin from selected South African marine brown algae (Phaeophyta) using HPLC-UV/Vis
- Authors: Mubaiwa, Byron Tawanda
- Date: 2015
- Subjects: Marine algae , Brown algae , High performance liquid chromatography , Functional foods , Xanthophylls , Carotenoids , Extraction (Chemistry)
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3868 , http://hdl.handle.net/10962/d1017879
- Description: Marine brown algae (seaweeds) are a rich source of fucoxanthin, a xanthophyll carotenoid that is naturally, an accessory pigment in the process of photosynthesis of sea vegetation such as Sargassum incisifolium. Fucoxanthin has been exploited by nutraceutical companies for its anti-obesity effects that has resulted in an increase of seaweed slimming preparations such as FucoThin™. The field is getting widespread consumer attention as interest in fucoxanthin has also transcended to its widespread biological potential which include cytotoxicity, anti-diabetic, anti-oxidant, anti-inflammatory and anti-plasmodium effects. We therefore wanted to identify a reliable source(s) of fucoxanthin from diverse samples of South African marine brown algae in order to explore our medicinal chemistry interests around the cytotoxicity and anti-malarial potential of fucoxanthin. A known source, Sargassum incisifolium, was used to isolate (maceration in CH₂Cl₂/MeOH at 35 °C followed by a hexane/EtOAc step gradient silica column of the crude extract and reversed phase semi-prep HPLC) and characterize (1D and 2D NMR) fucoxanthin (reference standard) in order to develop an analytical method for its determination in selected diverse brown algae commonly found in South Africa. The HPLC [Column: Phenomenex® Synergi™ (250 x 3.0 mm i.d); Mobile phase: ACN/H2O (95:5)] method developed for this analysis was validated according the guidelines set by the International Conference on Harmonization (ICH). Fifteen species were then assessed for fucoxanthin content (μg/g of dried weight) using the developed method. Stability studies on fucoxanthin were also carried out to assess photo- and pH degradation of fucoxanthin. Zonaria subarticulata (KOS130226-18) from Kenton-On-Sea beach and Sargassum incisifolium (PA130427-1) from Port Alfred beach were found to be the highest producers of fucoxanthin with 0.50 mg/g and 0.45 mg/g dried weight respectively. Fucoxanthin was found to be both photo-labile and sensitive to both acidic and basic pH environments. However, the pigment was more photostable in pure as opposed to extract form and also showed to be more stable at pH 10.0. Our findings show that Z. subarticulata and S. incisifolium could be reliable sources of fucoxanthin and can be considered as the algae to use in optimized extraction procedures in further studies. Also, when working with fucoxanthin, it is important to protect it from light. Any consideration of taking fucoxanthin preparation orally (as a nutraceutical) should consider protecting the active from the harsh conditions of the gastrointestinal tract. Any upscale production of fucoxanthin from seaweed should consider variations such as geographical, seasonal, lifecycle stage, etc. of identified algae as these may be important factors in obtaining effective concentrations of fucoxanthin.
- Full Text:
- Date Issued: 2015
- Authors: Mubaiwa, Byron Tawanda
- Date: 2015
- Subjects: Marine algae , Brown algae , High performance liquid chromatography , Functional foods , Xanthophylls , Carotenoids , Extraction (Chemistry)
- Language: English
- Type: Thesis , Masters , MPharm
- Identifier: vital:3868 , http://hdl.handle.net/10962/d1017879
- Description: Marine brown algae (seaweeds) are a rich source of fucoxanthin, a xanthophyll carotenoid that is naturally, an accessory pigment in the process of photosynthesis of sea vegetation such as Sargassum incisifolium. Fucoxanthin has been exploited by nutraceutical companies for its anti-obesity effects that has resulted in an increase of seaweed slimming preparations such as FucoThin™. The field is getting widespread consumer attention as interest in fucoxanthin has also transcended to its widespread biological potential which include cytotoxicity, anti-diabetic, anti-oxidant, anti-inflammatory and anti-plasmodium effects. We therefore wanted to identify a reliable source(s) of fucoxanthin from diverse samples of South African marine brown algae in order to explore our medicinal chemistry interests around the cytotoxicity and anti-malarial potential of fucoxanthin. A known source, Sargassum incisifolium, was used to isolate (maceration in CH₂Cl₂/MeOH at 35 °C followed by a hexane/EtOAc step gradient silica column of the crude extract and reversed phase semi-prep HPLC) and characterize (1D and 2D NMR) fucoxanthin (reference standard) in order to develop an analytical method for its determination in selected diverse brown algae commonly found in South Africa. The HPLC [Column: Phenomenex® Synergi™ (250 x 3.0 mm i.d); Mobile phase: ACN/H2O (95:5)] method developed for this analysis was validated according the guidelines set by the International Conference on Harmonization (ICH). Fifteen species were then assessed for fucoxanthin content (μg/g of dried weight) using the developed method. Stability studies on fucoxanthin were also carried out to assess photo- and pH degradation of fucoxanthin. Zonaria subarticulata (KOS130226-18) from Kenton-On-Sea beach and Sargassum incisifolium (PA130427-1) from Port Alfred beach were found to be the highest producers of fucoxanthin with 0.50 mg/g and 0.45 mg/g dried weight respectively. Fucoxanthin was found to be both photo-labile and sensitive to both acidic and basic pH environments. However, the pigment was more photostable in pure as opposed to extract form and also showed to be more stable at pH 10.0. Our findings show that Z. subarticulata and S. incisifolium could be reliable sources of fucoxanthin and can be considered as the algae to use in optimized extraction procedures in further studies. Also, when working with fucoxanthin, it is important to protect it from light. Any consideration of taking fucoxanthin preparation orally (as a nutraceutical) should consider protecting the active from the harsh conditions of the gastrointestinal tract. Any upscale production of fucoxanthin from seaweed should consider variations such as geographical, seasonal, lifecycle stage, etc. of identified algae as these may be important factors in obtaining effective concentrations of fucoxanthin.
- Full Text:
- Date Issued: 2015
High pressure liquid chromatographic quantification of nitrile biocatalysis
- Authors: Mathiba, Kgama
- Date: 2012
- Subjects: High performance liquid chromatography , Rhodococcus , Biocatalysis , Organic compounds -- Industrial applications
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4129 , http://hdl.handle.net/10962/d1015710
- Description: Nitrile biocatalysts are of use in the chemical and pharmaceutical industries for the synthesis of carboxyamides and carboxylic acids. In particular, the application of biocatalysts in the synthesis of single enantiomer compounds is of increasing interest, but requires novel substrate specific highly stereoselective biocatalysts. Addition to the limited toolbox of known nitrile biocatalysts requires definitive characterisation of the biocatalysts through accurate determination of the substrate profiles and quantification of activity. The accurate quantification of stereoisomers chiral mixtures to determine biocatalyst stereoselectivity remains a significant challenge due to the difficulty in separating stereoisomers by physical methods. The known nitrile metabolising organism, Rhodococcus rhodochrous ATCC BAA-870, was grown in a defined medium and harvested, providing whole cell biocatalyst. Additional biomass was disrupted to provide a cell free enzyme extract, which was put through an enzyme purification protocol to provide a solution with specific activity of 351 U.mg⁻¹. A portion of the enzyme was self immobilised using the SphereZyme™ technique. The nitrile hydratase SphereZymes™ (1.2 U.mg⁻¹ initial activity) that were prepared had pH and temperature optima of 6 and 30°C respectively, and could be recovered by repeated washing. The particles retained activity in the presence of the organic solvents isooctane and n-hexadecane saturated with 50 mM phosphate buffer (pH 7.5). An initial analytical system was devised for quantification of the nitrile hydratase activity using the non-chiral substrate benzonitrile. An improved reversed phase high performance liquid chromatography method was developed to separate and quantify benzamide, benzoic acid and benzonitrile. The mobile phase consisting of 0.1% trifluoroacetic acid in H₂O and acetonitrile (70:30, %v/v), at a flow rate of 0.5 ml.ml⁻¹, 25°C, resolved all three analytes in 3.5 minutes on a Waters X-Terra MS C18 3.5μm column. UV detection was carried out at 210 nm. Analytical methods to determine activity and enantioselectivity of the whole cell biocatalyst were subsequently developed for both β-amino nitriles and β-hydroxy nitrile substrates and hydrolysis products.
- Full Text:
- Date Issued: 2012
- Authors: Mathiba, Kgama
- Date: 2012
- Subjects: High performance liquid chromatography , Rhodococcus , Biocatalysis , Organic compounds -- Industrial applications
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4129 , http://hdl.handle.net/10962/d1015710
- Description: Nitrile biocatalysts are of use in the chemical and pharmaceutical industries for the synthesis of carboxyamides and carboxylic acids. In particular, the application of biocatalysts in the synthesis of single enantiomer compounds is of increasing interest, but requires novel substrate specific highly stereoselective biocatalysts. Addition to the limited toolbox of known nitrile biocatalysts requires definitive characterisation of the biocatalysts through accurate determination of the substrate profiles and quantification of activity. The accurate quantification of stereoisomers chiral mixtures to determine biocatalyst stereoselectivity remains a significant challenge due to the difficulty in separating stereoisomers by physical methods. The known nitrile metabolising organism, Rhodococcus rhodochrous ATCC BAA-870, was grown in a defined medium and harvested, providing whole cell biocatalyst. Additional biomass was disrupted to provide a cell free enzyme extract, which was put through an enzyme purification protocol to provide a solution with specific activity of 351 U.mg⁻¹. A portion of the enzyme was self immobilised using the SphereZyme™ technique. The nitrile hydratase SphereZymes™ (1.2 U.mg⁻¹ initial activity) that were prepared had pH and temperature optima of 6 and 30°C respectively, and could be recovered by repeated washing. The particles retained activity in the presence of the organic solvents isooctane and n-hexadecane saturated with 50 mM phosphate buffer (pH 7.5). An initial analytical system was devised for quantification of the nitrile hydratase activity using the non-chiral substrate benzonitrile. An improved reversed phase high performance liquid chromatography method was developed to separate and quantify benzamide, benzoic acid and benzonitrile. The mobile phase consisting of 0.1% trifluoroacetic acid in H₂O and acetonitrile (70:30, %v/v), at a flow rate of 0.5 ml.ml⁻¹, 25°C, resolved all three analytes in 3.5 minutes on a Waters X-Terra MS C18 3.5μm column. UV detection was carried out at 210 nm. Analytical methods to determine activity and enantioselectivity of the whole cell biocatalyst were subsequently developed for both β-amino nitriles and β-hydroxy nitrile substrates and hydrolysis products.
- Full Text:
- Date Issued: 2012
An evaluation of UPLC technology for the simultaneous analysis of actives in a multi-active drug
- Authors: Bawjee, Janita
- Date: 2011
- Subjects: High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10384 , http://hdl.handle.net/10948/d1008407 , High performance liquid chromatography
- Description: The evaluation of the potential to use Ultra Performance Liquid Chromatography (UPLC) for the simultaneous quantification of all the actives in a multi-active tablet is described in this work. Part of the evaluation was to ensure that the necessary regulatory requirements were adhered to by ascertaining that an analytical method is suitable for a specific purpose through analytical method validation for the specific multi-active tablet. The UPLC method was also tested for the analysis of similar products, namely tablet formulations that contain similar active ingredients in the same proportions but with an additional active ingredient. A method for the simultaneous determination of paracetamol, caffeine and codeine phosphate was developed using UPLC technology. The UPLC developed method was more efficient than the existing in-house HPLC method. The UPLC method was then validated in accordance to ICH and USP guidelines. The application of this UPLC method for the analysis of similar products containing paracetamol, caffeine, codeine phosphate and one extra active ingredient was very challenging. The low concentration of the additional component, differences in sample matrix and differences in formulations added to the challenges. The direct application for the analysis of products Y and Z was not successful; however the method could be used as a platform for further research. A cost comparison between the UPLC and HPLC methods showed the UPLC method to be more cost effective. Thus, while maintenance costs are higher for the UPLC instrument, column costs are comparable to HPLC columns, but solvent and waste disposal charges decrease considerably due to lower solvent use. The reduction in instrument time dramatically improves the cost effectiveness of UPLC over HPLC due to a concurrent reduction in analyst time requirement. The results of this study show that the analytical costs associated with the analysis of multi-active drugs using HPLC procedures can be reduced substantially by the CONFIDENTIAL INTELLECTUAL PROPERTY OF ASPEN PHARMACARE implementation of UPLC technology. The hypothesis that the enhanced chromatographic power of UPLC can be leveraged to provide faster analysis times hence increased product throughput rates, and lower operating costs for the analysis of multi-active drugs was accepted. These advantages were achieved whilst meeting all regulatory requirements for analytical methods as required by regulatory bodies.
- Full Text:
- Date Issued: 2011
- Authors: Bawjee, Janita
- Date: 2011
- Subjects: High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10384 , http://hdl.handle.net/10948/d1008407 , High performance liquid chromatography
- Description: The evaluation of the potential to use Ultra Performance Liquid Chromatography (UPLC) for the simultaneous quantification of all the actives in a multi-active tablet is described in this work. Part of the evaluation was to ensure that the necessary regulatory requirements were adhered to by ascertaining that an analytical method is suitable for a specific purpose through analytical method validation for the specific multi-active tablet. The UPLC method was also tested for the analysis of similar products, namely tablet formulations that contain similar active ingredients in the same proportions but with an additional active ingredient. A method for the simultaneous determination of paracetamol, caffeine and codeine phosphate was developed using UPLC technology. The UPLC developed method was more efficient than the existing in-house HPLC method. The UPLC method was then validated in accordance to ICH and USP guidelines. The application of this UPLC method for the analysis of similar products containing paracetamol, caffeine, codeine phosphate and one extra active ingredient was very challenging. The low concentration of the additional component, differences in sample matrix and differences in formulations added to the challenges. The direct application for the analysis of products Y and Z was not successful; however the method could be used as a platform for further research. A cost comparison between the UPLC and HPLC methods showed the UPLC method to be more cost effective. Thus, while maintenance costs are higher for the UPLC instrument, column costs are comparable to HPLC columns, but solvent and waste disposal charges decrease considerably due to lower solvent use. The reduction in instrument time dramatically improves the cost effectiveness of UPLC over HPLC due to a concurrent reduction in analyst time requirement. The results of this study show that the analytical costs associated with the analysis of multi-active drugs using HPLC procedures can be reduced substantially by the CONFIDENTIAL INTELLECTUAL PROPERTY OF ASPEN PHARMACARE implementation of UPLC technology. The hypothesis that the enhanced chromatographic power of UPLC can be leveraged to provide faster analysis times hence increased product throughput rates, and lower operating costs for the analysis of multi-active drugs was accepted. These advantages were achieved whilst meeting all regulatory requirements for analytical methods as required by regulatory bodies.
- Full Text:
- Date Issued: 2011
Purification and characterization of fructosyltransferase for the synthesis of short-chain fructo-oligosaccharides and investigation into thier anti-carcinogenic properties
- Authors: Nemukula, Aluwani
- Date: 2009
- Subjects: Oligosaccharides , Polygalacturonase , Aspergillus , Fructose , Inulin , Cancer -- Prevention , Cancer -- Research , Carcinogens , High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3927 , http://hdl.handle.net/10962/d1003986 , Oligosaccharides , Polygalacturonase , Aspergillus , Fructose , Inulin , Cancer -- Prevention , Cancer -- Research , Carcinogens , High performance liquid chromatography
- Description: There is a growing attention in the synthesis of fructo-oligosaccharides (FOS) due to their excellent bio-functional and health-promoting properties. The current production processes are limited to chemical hydrolysis reactions of plant extracts, which are often associated with several drawbacks. In this study, fructosyltransferase (FTase) and polygalacturonase (PGase) activities, present in a commercial enzyme preparation (Pectinex® Ultra SP-L) sourced from Aspergillus aculeatus, have been separated and fully purified by anion-exchange and sizeexclusion chromatography. The FTase possesses fructosyl transfer activity for FOS synthesis and the PGase has pectin hydrolytic activity. Fructosyltransferase is a single-band protein with a molecular weight of 85 kDa, whereas PGase is a distinct protein of 40 kDa. The temperature and pH optima of FTase were 60 ºC and 6.0, with a half-life of 8 h; while that for PGase were 40 ºC and 6.0, respectively. FTase was slightly inhibited in the presence of Ni²⁺, Mg²⁺ and urea; but PGase was more susceptible to divalent ions such as Ca²⁺, Mg²⁺ and Mn²⁺. The kinetic parameters (Km and Vmax) of FTase for the hydrolysis of β-(2→1) linkages from sucrose were 752.3 mM and 120.5 μmol.min⁻¹.mL⁻¹, respectively; whereas the same parameters for pectin hydrolysis by PGase were 13.0 mg.mL⁻¹ and 263 μmol.min-1.mL⁻¹, respectively. The purified FTase was able to transfer fructosyl residues from sucrose, synthesizing the corresponding chains of FOS. PGase was relatively stable at 40 ºC (t½ > 3 h), depolymerizing the pectin backbone while releasing the inulins from within the chicory roots. Analysis of various mixtures of FOS by mass spectrometry, HPLC and ¹H-NMR was undertaken. Results indicated that MS with electrospray ionization and ¹H-NMR are capable of providing relative quantitative data of the FOS present in the mixtures. The pharmaceutical effects of various sc-FOS (0.5%, v/v) and SCFA (0.3%, v/v) on certain bacterial enzymes (β-glucuronidase, urease and β-glucosidase) associated with the formation of carcinogens were also studied. These enzyme activities were not directly influenced by the sc-FOS, but were found to be remarkably decreased by SCFA, pointing toward the prebiotic effect of FOS in intestinal microflora modulation.
- Full Text:
- Date Issued: 2009
- Authors: Nemukula, Aluwani
- Date: 2009
- Subjects: Oligosaccharides , Polygalacturonase , Aspergillus , Fructose , Inulin , Cancer -- Prevention , Cancer -- Research , Carcinogens , High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3927 , http://hdl.handle.net/10962/d1003986 , Oligosaccharides , Polygalacturonase , Aspergillus , Fructose , Inulin , Cancer -- Prevention , Cancer -- Research , Carcinogens , High performance liquid chromatography
- Description: There is a growing attention in the synthesis of fructo-oligosaccharides (FOS) due to their excellent bio-functional and health-promoting properties. The current production processes are limited to chemical hydrolysis reactions of plant extracts, which are often associated with several drawbacks. In this study, fructosyltransferase (FTase) and polygalacturonase (PGase) activities, present in a commercial enzyme preparation (Pectinex® Ultra SP-L) sourced from Aspergillus aculeatus, have been separated and fully purified by anion-exchange and sizeexclusion chromatography. The FTase possesses fructosyl transfer activity for FOS synthesis and the PGase has pectin hydrolytic activity. Fructosyltransferase is a single-band protein with a molecular weight of 85 kDa, whereas PGase is a distinct protein of 40 kDa. The temperature and pH optima of FTase were 60 ºC and 6.0, with a half-life of 8 h; while that for PGase were 40 ºC and 6.0, respectively. FTase was slightly inhibited in the presence of Ni²⁺, Mg²⁺ and urea; but PGase was more susceptible to divalent ions such as Ca²⁺, Mg²⁺ and Mn²⁺. The kinetic parameters (Km and Vmax) of FTase for the hydrolysis of β-(2→1) linkages from sucrose were 752.3 mM and 120.5 μmol.min⁻¹.mL⁻¹, respectively; whereas the same parameters for pectin hydrolysis by PGase were 13.0 mg.mL⁻¹ and 263 μmol.min-1.mL⁻¹, respectively. The purified FTase was able to transfer fructosyl residues from sucrose, synthesizing the corresponding chains of FOS. PGase was relatively stable at 40 ºC (t½ > 3 h), depolymerizing the pectin backbone while releasing the inulins from within the chicory roots. Analysis of various mixtures of FOS by mass spectrometry, HPLC and ¹H-NMR was undertaken. Results indicated that MS with electrospray ionization and ¹H-NMR are capable of providing relative quantitative data of the FOS present in the mixtures. The pharmaceutical effects of various sc-FOS (0.5%, v/v) and SCFA (0.3%, v/v) on certain bacterial enzymes (β-glucuronidase, urease and β-glucosidase) associated with the formation of carcinogens were also studied. These enzyme activities were not directly influenced by the sc-FOS, but were found to be remarkably decreased by SCFA, pointing toward the prebiotic effect of FOS in intestinal microflora modulation.
- Full Text:
- Date Issued: 2009
Evaluation of the safety and efficacy of topical mometasone furoate formulations
- Authors: Chamboko, Bernadett Vongayi
- Date: 2007
- Subjects: Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3748 , http://hdl.handle.net/10962/d1003226 , Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Description: The human skin blanching assay (HSBA) is a well-researched and validated method for the bioequivalence assessment of topical corticosteroids. Traditionally, visual assessment of skin blanching has been used. Such testing methods are not conducive for interlaboratory comparisons. Regulatory bodies prefer less subjective methods of analysis. The FDA released guidelines on the assessment of bioequivalence for topical corticosteroids that recommends the use of a chromameter as a reliable method to measure skin blanching although the use of visual assessment with acceptable validation is also provided for. However, the FDA does not elucidate on the manipulation and handling of the chromameter during skin blanching measurements. The purpose of this project was several fold, which included investigations to standardize the manipulation and handling of a chromameter. In particular, measures to avoid skin whitening resulting from the effects of pressure on the skin during chromameter use were investigated. Other methods of analysis should surpass or at least be comparable to the HSBA if such methods are to be used for the assessment of topical corticosteroids. Microdialysis is a relatively new technique for assessing the rate at which drug penetrates the skin. The advantage of using this method is that there are fewer restrictions for selection of an appropriate study population unlike those required for the HSBA where one has to be both a ‘responder’ and a ‘detector’ for their results to be used in data analysis. Microdialysis was investigated by initially conducting experiments in which microdialysis probes were embedded into topical formulations containing mometasone furoate (MF) and the initial results revealed that relatively low drug was released from the formulations. These results indicated that should microdialysis be applied to measure the in vivo release of MF from such topical formulations following application to the skin, even lower concentrations of MF would likely result in the dialysate, necessitating the need for ultra-high sensitive methods of analysis. Typically, the availability of an appropriate analytical technique such as liquid chromatography coupled with mass spectrometry (LCMS) would be a pre-requisite for such in vivo studies. However, only high-pressure liquid chromatography (HPLC) and other less sensitive equipment was available in the laboratories. The study objectives were therefore focussed on in vitro assessment of the release of MF from topical formulations using microdialysis and Franz cells. In addition, the in vivo release of MF was also studied using the HSBA. Data obtained from the microdialysis experiments were compared with the data obtained from the Franz cell diffusion studies in order to provide information on the pharmaceutical availability of MF from the various topical MF dosage forms. Subsequently, pharmaceutical equivalence was investigated from the comparative pharmaceutical availability data using statistical analysis. An additional objective was to attempt to correlate in vitro with in vivo data (IVIVC) to establish a model that could be used to assess safety and efficacy of generic topical drug products. The in vivo data obtained from the HSBA were processed according to the FDA requirements and these pharmacodynamic data were subsequently compared with the microdialysis and Franz cell results. In summary the objectives of this project were: 1. To develop a system to improve the reproducibility of the use of a Minolta® chromameter and compare this with the standard/normal manipulation and handling of such instruments. 2. To develop and validate an HPLC method for the analysis of MF for use with in vitro diffusion studies using microdialysis and Franz cells. 3. To conduct a comparative HSBA on proprietary MF topical creams from two different countries in accordance with the FDA guidance. 4. To assess the pharmaceutical equivalence of topical formulations containing MF using Franz diffusion cells and in vitro microdialysis. 5. To compare the in vivo data obtained from the HSBA with those obtained in vitro using microdialysis and Franz cells.
- Full Text:
- Date Issued: 2007
- Authors: Chamboko, Bernadett Vongayi
- Date: 2007
- Subjects: Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3748 , http://hdl.handle.net/10962/d1003226 , Adrenocortical hormones -- Physiological effect , Drugs -- Testing , Dermatopharmacology , High performance liquid chromatography
- Description: The human skin blanching assay (HSBA) is a well-researched and validated method for the bioequivalence assessment of topical corticosteroids. Traditionally, visual assessment of skin blanching has been used. Such testing methods are not conducive for interlaboratory comparisons. Regulatory bodies prefer less subjective methods of analysis. The FDA released guidelines on the assessment of bioequivalence for topical corticosteroids that recommends the use of a chromameter as a reliable method to measure skin blanching although the use of visual assessment with acceptable validation is also provided for. However, the FDA does not elucidate on the manipulation and handling of the chromameter during skin blanching measurements. The purpose of this project was several fold, which included investigations to standardize the manipulation and handling of a chromameter. In particular, measures to avoid skin whitening resulting from the effects of pressure on the skin during chromameter use were investigated. Other methods of analysis should surpass or at least be comparable to the HSBA if such methods are to be used for the assessment of topical corticosteroids. Microdialysis is a relatively new technique for assessing the rate at which drug penetrates the skin. The advantage of using this method is that there are fewer restrictions for selection of an appropriate study population unlike those required for the HSBA where one has to be both a ‘responder’ and a ‘detector’ for their results to be used in data analysis. Microdialysis was investigated by initially conducting experiments in which microdialysis probes were embedded into topical formulations containing mometasone furoate (MF) and the initial results revealed that relatively low drug was released from the formulations. These results indicated that should microdialysis be applied to measure the in vivo release of MF from such topical formulations following application to the skin, even lower concentrations of MF would likely result in the dialysate, necessitating the need for ultra-high sensitive methods of analysis. Typically, the availability of an appropriate analytical technique such as liquid chromatography coupled with mass spectrometry (LCMS) would be a pre-requisite for such in vivo studies. However, only high-pressure liquid chromatography (HPLC) and other less sensitive equipment was available in the laboratories. The study objectives were therefore focussed on in vitro assessment of the release of MF from topical formulations using microdialysis and Franz cells. In addition, the in vivo release of MF was also studied using the HSBA. Data obtained from the microdialysis experiments were compared with the data obtained from the Franz cell diffusion studies in order to provide information on the pharmaceutical availability of MF from the various topical MF dosage forms. Subsequently, pharmaceutical equivalence was investigated from the comparative pharmaceutical availability data using statistical analysis. An additional objective was to attempt to correlate in vitro with in vivo data (IVIVC) to establish a model that could be used to assess safety and efficacy of generic topical drug products. The in vivo data obtained from the HSBA were processed according to the FDA requirements and these pharmacodynamic data were subsequently compared with the microdialysis and Franz cell results. In summary the objectives of this project were: 1. To develop a system to improve the reproducibility of the use of a Minolta® chromameter and compare this with the standard/normal manipulation and handling of such instruments. 2. To develop and validate an HPLC method for the analysis of MF for use with in vitro diffusion studies using microdialysis and Franz cells. 3. To conduct a comparative HSBA on proprietary MF topical creams from two different countries in accordance with the FDA guidance. 4. To assess the pharmaceutical equivalence of topical formulations containing MF using Franz diffusion cells and in vitro microdialysis. 5. To compare the in vivo data obtained from the HSBA with those obtained in vitro using microdialysis and Franz cells.
- Full Text:
- Date Issued: 2007
In vitro release of ketoprofen from proprietary and extemporaneously manufactured gels
- Tettey-Amlalo, Ralph Nii Okai
- Authors: Tettey-Amlalo, Ralph Nii Okai
- Date: 2005
- Subjects: Transdermal medication , Drug delivery systems , High performance liquid chromatography , Nonsteroidal anti-inflammatory agents , Rheumatoid arthritis -- Treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3797 , http://hdl.handle.net/10962/d1003275 , Transdermal medication , Drug delivery systems , High performance liquid chromatography , Nonsteroidal anti-inflammatory agents , Rheumatoid arthritis -- Treatment
- Description: Ketoprofen is a potent non-steroidal anti-inflammatory drug which is used for the treatment of rheumatoid arthritis. The oral administration of ketoprofen can cause gastric irritation and adverse renal effects. Transdermal delivery of the drug can bypass gastrointestinal disturbances and provide relatively consistent drug concentrations at the site of administration. The release of ketoprofen from proprietary gel products from three different countries was evaluated by comparing the in vitro release profiles. Twenty extemporaneously prepared ketoprofen gel formulations using Carbopol® polymers were manufactured. The effect of polymer, drug concentration, pH and solvent systems on the in vitro release of ketoprofen from these formulations were investigated. The gels were evaluated for drug content and pH. The release of the drug from all the formulations obeyed the Higuchi principle. Two static FDA approved diffusion cells, namely the modified Franz diffusion cell and the European Pharmacopoeia diffusion cell, were compared by measuring the in vitro release rate of ketoprofen from all the gel formulations through a synthetic silicone membrane. High-performance liquid chromatography and ultraviolet spectrophotometric analytical techniques were both used for the analysis of ketoprofen. The validated methods were employed for the determination of ketoprofen in the sample solutions taken from the receptor fluid. Two of the three proprietary products registered under the same manufacturing license exhibited similar results whereas the third product differed significantly. Among the variables investigated, the vehicle pH and solvent composition were found have the most significant effect on the in vitro release of ketoprofen from Carbopol® polymers. The different grades of Carbopol® polymers showed statistically significantly different release kinetics with respect to lag time. When evaluating the proprietary products, both the modified Franz diffusion cell and the European Pharmacopoeia diffusion cell were deemed adequate although higher profiles were generally obtained from the European Pharmacopoeia diffusion cells. Smoother diffusion profiles were obtained from samples analysed by high-performance liquid chromatography than by ultraviolet spectrophotometry in both diffusion cells. Sample solutions taken from Franz diffusion cells and analysed by ultraviolet spectrophotometry also produced smooth diffusion profiles. Erratic and higher diffusion profiles were observed with samples taken from the European Pharmacopoeia diffusion cell and analysed by ultraviolet spectrophotometry. The choice of diffusion cells and analytical procedure in product development must be weighed against the relatively poor reproducibility as observed with the European Pharmacopoeia diffusion cell.
- Full Text:
- Date Issued: 2005
- Authors: Tettey-Amlalo, Ralph Nii Okai
- Date: 2005
- Subjects: Transdermal medication , Drug delivery systems , High performance liquid chromatography , Nonsteroidal anti-inflammatory agents , Rheumatoid arthritis -- Treatment
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3797 , http://hdl.handle.net/10962/d1003275 , Transdermal medication , Drug delivery systems , High performance liquid chromatography , Nonsteroidal anti-inflammatory agents , Rheumatoid arthritis -- Treatment
- Description: Ketoprofen is a potent non-steroidal anti-inflammatory drug which is used for the treatment of rheumatoid arthritis. The oral administration of ketoprofen can cause gastric irritation and adverse renal effects. Transdermal delivery of the drug can bypass gastrointestinal disturbances and provide relatively consistent drug concentrations at the site of administration. The release of ketoprofen from proprietary gel products from three different countries was evaluated by comparing the in vitro release profiles. Twenty extemporaneously prepared ketoprofen gel formulations using Carbopol® polymers were manufactured. The effect of polymer, drug concentration, pH and solvent systems on the in vitro release of ketoprofen from these formulations were investigated. The gels were evaluated for drug content and pH. The release of the drug from all the formulations obeyed the Higuchi principle. Two static FDA approved diffusion cells, namely the modified Franz diffusion cell and the European Pharmacopoeia diffusion cell, were compared by measuring the in vitro release rate of ketoprofen from all the gel formulations through a synthetic silicone membrane. High-performance liquid chromatography and ultraviolet spectrophotometric analytical techniques were both used for the analysis of ketoprofen. The validated methods were employed for the determination of ketoprofen in the sample solutions taken from the receptor fluid. Two of the three proprietary products registered under the same manufacturing license exhibited similar results whereas the third product differed significantly. Among the variables investigated, the vehicle pH and solvent composition were found have the most significant effect on the in vitro release of ketoprofen from Carbopol® polymers. The different grades of Carbopol® polymers showed statistically significantly different release kinetics with respect to lag time. When evaluating the proprietary products, both the modified Franz diffusion cell and the European Pharmacopoeia diffusion cell were deemed adequate although higher profiles were generally obtained from the European Pharmacopoeia diffusion cells. Smoother diffusion profiles were obtained from samples analysed by high-performance liquid chromatography than by ultraviolet spectrophotometry in both diffusion cells. Sample solutions taken from Franz diffusion cells and analysed by ultraviolet spectrophotometry also produced smooth diffusion profiles. Erratic and higher diffusion profiles were observed with samples taken from the European Pharmacopoeia diffusion cell and analysed by ultraviolet spectrophotometry. The choice of diffusion cells and analytical procedure in product development must be weighed against the relatively poor reproducibility as observed with the European Pharmacopoeia diffusion cell.
- Full Text:
- Date Issued: 2005
High-performance liquid chromatographic studies of the acid degradation, pharmacokinetics and comparative bioavailability of erythromycin
- Authors: Glew, Fiona
- Date: 1989
- Subjects: High performance liquid chromatography , Erythromycin -- Analysis , Erythromycin -- Pharmacokinetics , Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3737 , http://hdl.handle.net/10962/d1001529
- Description: Erythromycin is a macrolide antibiotic with a spectrum similar to penicillin and is used mainly in the treatment of infections caused by gram-positive organisms. Since its discovery in 1952, erythromycin has achieved wide-spread clinical use. Susceptibility of erythromycin base to inactivation by acid results in decreased availability following exposure to acidic gastric fluids. Formulation of acid resistant dosage forms and the preparation of acid stable chemical derivatives have been attempted to improve absorption and subsequent clinical efficacy . Two of the most commonly used erythromycin derivatives are the stearic acid salt (erythromycin stearate) and the lauryl sulphate salt of the propionyl ester (erythromycin estolate). Although it has been known for many years that erythromycin is susceptible to acid degradation, very few reports on the stability of erythromycin in aqueous solutions appear in the literature. In this study, a high-performance liquid chromatographic system using electrochemical detection was employed for a kinetic study of erythromycin degradation. The effect of varying acid pH on the degradation rate of both erythromycin base and erythromycin stearate, and the effect on the hydrolysis rate of erythromycin estolate is presented. In addition, the effect of temperature on erythromycin degradation was also investigated. Until recently, the majority of pharmacokinetic and bioavailability studies have utilized relatively non-specific microbiological assay procedures. However, in this study a solid phase extraction, followed by the use of a high-performance liquid chromatographic system using electrochemical coulometric detection was employed for the determination of erythromycin in biological fluids. Human volunteers each received enteric coated erythromycin base pellets in capsule dosage form and also film coated erythromycin stearate tablets on separate occasions. Results from the clinical trials revealed the enteric coated erythromycin base pellets had a greater bioavailability than the film coated erythromycin stearate tablets. Computer fitting of data revealed no intra-volunteer variability in elimination rate constants, suggesting differences in serum levels following administration of both dosage forms are due to variation in absorption. Results from the clinical trials were also compared with those obtained from a further trial, during which the same volunteers received erythromycin estolate
- Full Text:
- Date Issued: 1989
- Authors: Glew, Fiona
- Date: 1989
- Subjects: High performance liquid chromatography , Erythromycin -- Analysis , Erythromycin -- Pharmacokinetics , Erythromycin -- Bioavailability
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3737 , http://hdl.handle.net/10962/d1001529
- Description: Erythromycin is a macrolide antibiotic with a spectrum similar to penicillin and is used mainly in the treatment of infections caused by gram-positive organisms. Since its discovery in 1952, erythromycin has achieved wide-spread clinical use. Susceptibility of erythromycin base to inactivation by acid results in decreased availability following exposure to acidic gastric fluids. Formulation of acid resistant dosage forms and the preparation of acid stable chemical derivatives have been attempted to improve absorption and subsequent clinical efficacy . Two of the most commonly used erythromycin derivatives are the stearic acid salt (erythromycin stearate) and the lauryl sulphate salt of the propionyl ester (erythromycin estolate). Although it has been known for many years that erythromycin is susceptible to acid degradation, very few reports on the stability of erythromycin in aqueous solutions appear in the literature. In this study, a high-performance liquid chromatographic system using electrochemical detection was employed for a kinetic study of erythromycin degradation. The effect of varying acid pH on the degradation rate of both erythromycin base and erythromycin stearate, and the effect on the hydrolysis rate of erythromycin estolate is presented. In addition, the effect of temperature on erythromycin degradation was also investigated. Until recently, the majority of pharmacokinetic and bioavailability studies have utilized relatively non-specific microbiological assay procedures. However, in this study a solid phase extraction, followed by the use of a high-performance liquid chromatographic system using electrochemical coulometric detection was employed for the determination of erythromycin in biological fluids. Human volunteers each received enteric coated erythromycin base pellets in capsule dosage form and also film coated erythromycin stearate tablets on separate occasions. Results from the clinical trials revealed the enteric coated erythromycin base pellets had a greater bioavailability than the film coated erythromycin stearate tablets. Computer fitting of data revealed no intra-volunteer variability in elimination rate constants, suggesting differences in serum levels following administration of both dosage forms are due to variation in absorption. Results from the clinical trials were also compared with those obtained from a further trial, during which the same volunteers received erythromycin estolate
- Full Text:
- Date Issued: 1989
Application of high-performance liquid chromatography for the analysis and pharmocokinetics of mephenoxalone
- Authors: Van der Westhuizen, Fiona
- Date: 1988 , 2013-03-06
- Subjects: High performance liquid chromatography , Central nervous system depressants
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3810 , http://hdl.handle.net/10962/d1004385 , High performance liquid chromatography , Central nervous system depressants
- Description: Mephenoxalone is a mild central nervous system depressant with activity resembling that of meprobamate. Since its introduction in 1961 mephenoxalone has been used as an anxiolytic and as a muscle relaxant, although the latter effect is weak. Preliminary studies on the absorption and disposition of mephenoxalone have been conducted in beagle dogs but no pharmacokinetic data from human studies have been reported, except for a single study in which the biotransformation products present in human urine were identified. Methods presently available for the determination of mephenoxalone in biological fluids lack the sensitivity, specificity and precision required for detailed pharmacokinetic studies. In this study, a rapid, sensitive, precise reverse-phase high-performance liquid chromatographic method with ultraviolet detection at 200nm was employed for the determination of mephenoxalone in biological fluids. Serum and urine samples were prepared for chromatographic analysis using simple liquid-liquid extraction techniques. The application of the assay to pharmacokinetic studies in humans is presented. After administration of a single oral dose of 400mg mephenoxalone dispersed in 150ml water to six young, healthy volunteers, the compound was rapidly absorbed with the peak concentration of 8μg/ml occurring after about 1 hour. The elimination half-life was approximately 3 hours. The drug was extensively metabolized with only about 1 percent of the administered dose being excreted unchanged in the urine after 24 hours. The bioavailability of a newly developed mephenoxalone-containing tablet was also investigated. The drug was absorbed more rapidly from the tablet than from the dispersed dose. This was attributed to a shorter in vivo dissolution time on the basis of in vitro tests, but this effect is not expected to be clinically significant. In addition, two human urinary metabolites of mephenoxalone were identified as unconjugated hydroxylated derivatives using thermospray HPLC-mass spectrometry. The plasma protein-binding properties of mephenoxalone were also investigated.
- Full Text:
- Date Issued: 1988
- Authors: Van der Westhuizen, Fiona
- Date: 1988 , 2013-03-06
- Subjects: High performance liquid chromatography , Central nervous system depressants
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3810 , http://hdl.handle.net/10962/d1004385 , High performance liquid chromatography , Central nervous system depressants
- Description: Mephenoxalone is a mild central nervous system depressant with activity resembling that of meprobamate. Since its introduction in 1961 mephenoxalone has been used as an anxiolytic and as a muscle relaxant, although the latter effect is weak. Preliminary studies on the absorption and disposition of mephenoxalone have been conducted in beagle dogs but no pharmacokinetic data from human studies have been reported, except for a single study in which the biotransformation products present in human urine were identified. Methods presently available for the determination of mephenoxalone in biological fluids lack the sensitivity, specificity and precision required for detailed pharmacokinetic studies. In this study, a rapid, sensitive, precise reverse-phase high-performance liquid chromatographic method with ultraviolet detection at 200nm was employed for the determination of mephenoxalone in biological fluids. Serum and urine samples were prepared for chromatographic analysis using simple liquid-liquid extraction techniques. The application of the assay to pharmacokinetic studies in humans is presented. After administration of a single oral dose of 400mg mephenoxalone dispersed in 150ml water to six young, healthy volunteers, the compound was rapidly absorbed with the peak concentration of 8μg/ml occurring after about 1 hour. The elimination half-life was approximately 3 hours. The drug was extensively metabolized with only about 1 percent of the administered dose being excreted unchanged in the urine after 24 hours. The bioavailability of a newly developed mephenoxalone-containing tablet was also investigated. The drug was absorbed more rapidly from the tablet than from the dispersed dose. This was attributed to a shorter in vivo dissolution time on the basis of in vitro tests, but this effect is not expected to be clinically significant. In addition, two human urinary metabolites of mephenoxalone were identified as unconjugated hydroxylated derivatives using thermospray HPLC-mass spectrometry. The plasma protein-binding properties of mephenoxalone were also investigated.
- Full Text:
- Date Issued: 1988
Phenylpropanolamine : analytical and pharmacokinetic studies using high-performance liquid chromatography
- Authors: Scherzinger, Sabine Hilda
- Date: 1988
- Subjects: Phenylpropanolamine , Pharmacokinetics , High performance liquid chromatography
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: vital:3811 , http://hdl.handle.net/10962/d1004528
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine structurally related to ephedrine has been widely used over t he past 40 years as a nasal decongestant and appetite suppressant. It has been the focus of much controversy concerning the efficacy of the drug in its use as an anorectic agent, and due to the side effects caused by the higher doses of PPA required for appetite suppression. Although extensively used, there is little information concerning the determination of PPA in biological fluids and on the pharmacokinetics of this drug. An adaptation of a published high-performance liquid chromatographic (HPLC) assay for PPA in serum and urine using U.V. detection at 210 nm is presented. PPA was separated in the reversed phase mode. The method has a limit of sensitivity of 5.0 ng/mL and 10.0 ng/mL in serum and urine respectively. Serum concentration data following a single 25 mg dose of phenylpropanolamine in human volunteers demonstrate the application of the analytical method for bioavailability and pharmacokinetic studies. After the administration of 25 mg, 50 mg or 100 mg PPA.HCl solutions to 5 human volunteers, a dose proportionality study demonstrated that PPA appears to exhibit linear kinetics. Linear one body compartment kinetics were assumed and the wagner-Nelson method used to transform in vivo serum data to absorption plots. The serum data were fitted to a model using nonlinear regression techniques to characterize the pharmacokinetic processes of PPA. The absorption of phenylpropanolamine appears to be discontinuous and the drug seems to favour a two body compartment model. The pharmacokinetic parameters obtained from a steady state study using multiple dosing of PPA.HCl solutions compared with those found from previous studies after the administration of sustained-release formulations. A plasma protein binding study using equilibrium dialysis demonstrated that PPA is not highly protein bound in the blood.
- Full Text:
- Date Issued: 1988
- Authors: Scherzinger, Sabine Hilda
- Date: 1988
- Subjects: Phenylpropanolamine , Pharmacokinetics , High performance liquid chromatography
- Language: English
- Type: text , Thesis , Masters , MSc
- Identifier: vital:3811 , http://hdl.handle.net/10962/d1004528
- Description: Phenylpropanolamine (PPA), a synthetic sympathomimetic amine structurally related to ephedrine has been widely used over t he past 40 years as a nasal decongestant and appetite suppressant. It has been the focus of much controversy concerning the efficacy of the drug in its use as an anorectic agent, and due to the side effects caused by the higher doses of PPA required for appetite suppression. Although extensively used, there is little information concerning the determination of PPA in biological fluids and on the pharmacokinetics of this drug. An adaptation of a published high-performance liquid chromatographic (HPLC) assay for PPA in serum and urine using U.V. detection at 210 nm is presented. PPA was separated in the reversed phase mode. The method has a limit of sensitivity of 5.0 ng/mL and 10.0 ng/mL in serum and urine respectively. Serum concentration data following a single 25 mg dose of phenylpropanolamine in human volunteers demonstrate the application of the analytical method for bioavailability and pharmacokinetic studies. After the administration of 25 mg, 50 mg or 100 mg PPA.HCl solutions to 5 human volunteers, a dose proportionality study demonstrated that PPA appears to exhibit linear kinetics. Linear one body compartment kinetics were assumed and the wagner-Nelson method used to transform in vivo serum data to absorption plots. The serum data were fitted to a model using nonlinear regression techniques to characterize the pharmacokinetic processes of PPA. The absorption of phenylpropanolamine appears to be discontinuous and the drug seems to favour a two body compartment model. The pharmacokinetic parameters obtained from a steady state study using multiple dosing of PPA.HCl solutions compared with those found from previous studies after the administration of sustained-release formulations. A plasma protein binding study using equilibrium dialysis demonstrated that PPA is not highly protein bound in the blood.
- Full Text:
- Date Issued: 1988
High performance liquid chromatographic analysis of erythromycin in serum and urine
- Authors: Stubbs, Christopher
- Date: 1985 , 2013-03-13
- Subjects: High performance liquid chromatography , Erythromycin , Erythromycin -- Pharmacokinetics , Chromatographic analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3813 , http://hdl.handle.net/10962/d1004581 , High performance liquid chromatography , Erythromycin , Erythromycin -- Pharmacokinetics , Chromatographic analysis
- Description: Erythromycin, a macrolide antibiotic used mainly against gram-positive bacteria has been in clinical use since 1952 (1). Previous pharmacokinetic data published on this antibiotic have been derived predominantly from microbiological assay techniques. However, these techniques are relatively imprecise as well as being non-specific and extremely tedious to perform. A novel high performance liquid chromatographic analysis of erythromycin in human serum and urine using U.V. detection at 200 nm and/or electrochemical detection using both an amperometric and a coulometric electrochemical detector is presented. The method involves a solid phase extraction procedure followed by a simple phase separation step and chromatography on a reverse phase column. In order to select the optimum U.V. detector for this analysis, five "state of the art" detectors were compared in terms of their signal-to-noise ratios at U.V. wavelengths between 200 and 210 nm. A known metabolite des-N-methylerythromycin is readily detectable using U.V. detection, whilst another metabolite/degradation product anhydroerythromycin is not seen using U.V. detection but is readily observable using an electrochemical detector. The method has a limit of sensitivity of 0.25 μg/mL and 1.00 μg/mL in serum and urine respectively (U.V. detection) and is sufficiently sensitive to monitor serum and urine concentrations of erythromycin in man after administration of a single 500 mg erythromycin stearate tablet. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1985
- Authors: Stubbs, Christopher
- Date: 1985 , 2013-03-13
- Subjects: High performance liquid chromatography , Erythromycin , Erythromycin -- Pharmacokinetics , Chromatographic analysis
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3813 , http://hdl.handle.net/10962/d1004581 , High performance liquid chromatography , Erythromycin , Erythromycin -- Pharmacokinetics , Chromatographic analysis
- Description: Erythromycin, a macrolide antibiotic used mainly against gram-positive bacteria has been in clinical use since 1952 (1). Previous pharmacokinetic data published on this antibiotic have been derived predominantly from microbiological assay techniques. However, these techniques are relatively imprecise as well as being non-specific and extremely tedious to perform. A novel high performance liquid chromatographic analysis of erythromycin in human serum and urine using U.V. detection at 200 nm and/or electrochemical detection using both an amperometric and a coulometric electrochemical detector is presented. The method involves a solid phase extraction procedure followed by a simple phase separation step and chromatography on a reverse phase column. In order to select the optimum U.V. detector for this analysis, five "state of the art" detectors were compared in terms of their signal-to-noise ratios at U.V. wavelengths between 200 and 210 nm. A known metabolite des-N-methylerythromycin is readily detectable using U.V. detection, whilst another metabolite/degradation product anhydroerythromycin is not seen using U.V. detection but is readily observable using an electrochemical detector. The method has a limit of sensitivity of 0.25 μg/mL and 1.00 μg/mL in serum and urine respectively (U.V. detection) and is sufficiently sensitive to monitor serum and urine concentrations of erythromycin in man after administration of a single 500 mg erythromycin stearate tablet. , KMBT_363 , Adobe Acrobat 9.53 Paper Capture Plug-in
- Full Text:
- Date Issued: 1985
Analytical procedures for the determination of wattle polyphenols in wastewaters
- Authors: Hendry, Antony John
- Date: 1984
- Subjects: Liquid chromatography , Spectrophotometry , High performance liquid chromatography , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4431 , http://hdl.handle.net/10962/d1007221 , Liquid chromatography , Spectrophotometry , High performance liquid chromatography , Water -- Purification
- Full Text:
- Date Issued: 1984
- Authors: Hendry, Antony John
- Date: 1984
- Subjects: Liquid chromatography , Spectrophotometry , High performance liquid chromatography , Water -- Purification
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:4431 , http://hdl.handle.net/10962/d1007221 , Liquid chromatography , Spectrophotometry , High performance liquid chromatography , Water -- Purification
- Full Text:
- Date Issued: 1984
Development of a high pressure liquid chromatographic method for the simultaneous analysis of sulphamethoxazole and trimethoprim and its application to biological fluids and dissolution rate studies on solid oral dosage forms
- Authors: Gochin, Rosa
- Date: 1980
- Subjects: High performance liquid chromatography , Body fluids -- Analysis , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3735 , http://hdl.handle.net/10962/d1001524
- Description: Co-trimoxazole, a combination of a 5-to-l ratio of Sulphamethoxazole (SMZ) and Trimethoprim (TMP) , is a highly effective, broad-spectrum antibacterial agent. Since its introduction in 1968, it has been extensively used in infections of the respiratory and urinary tracts. Co-trimoxazole was developed by the systematic investigation of a series of compounds whose mechanism of action was already known. As early as 1950 synergy between sulphonamides and 2,4-diaminopyrimidines was reported. This was to be expected as both groups of drugs exert their antibacterial activity by interfering with the same biochemical pathway in bacteria. TMP was chosen from among many 2,4-diaminopyrimidines tested because of its good antibacterial activity and low toxicity. SMZ was chosen from the sulphonamides available for combination with TMP because of similarity of their biological half-lives. The widespread use of the combination coupled with the fact that monitoring of the levels of all drugs in the body is becoming increasingly important has stimulated research into rapid and efficient methods for the analysis of TMP and SMZ in biological fluids. Another consequence of the immense popularity of the combination is the appearance on the market of several generic preparations of Co-trimoxazole. It is now generally recognized that drug products from different manufacturers which are chemically equivalent may not be therapeutically equivalent. This is due to the fact that the absorption rate and/or bioavailability (extent of absorption) of a poorly soluble drug may be markedly affected by its release rate from the product and by its subsequent dissolution rate in gastrointestinal fluids. Hence bioequivalence of these various products should be established
- Full Text:
- Date Issued: 1980
- Authors: Gochin, Rosa
- Date: 1980
- Subjects: High performance liquid chromatography , Body fluids -- Analysis , Drugs -- Dosage forms
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3735 , http://hdl.handle.net/10962/d1001524
- Description: Co-trimoxazole, a combination of a 5-to-l ratio of Sulphamethoxazole (SMZ) and Trimethoprim (TMP) , is a highly effective, broad-spectrum antibacterial agent. Since its introduction in 1968, it has been extensively used in infections of the respiratory and urinary tracts. Co-trimoxazole was developed by the systematic investigation of a series of compounds whose mechanism of action was already known. As early as 1950 synergy between sulphonamides and 2,4-diaminopyrimidines was reported. This was to be expected as both groups of drugs exert their antibacterial activity by interfering with the same biochemical pathway in bacteria. TMP was chosen from among many 2,4-diaminopyrimidines tested because of its good antibacterial activity and low toxicity. SMZ was chosen from the sulphonamides available for combination with TMP because of similarity of their biological half-lives. The widespread use of the combination coupled with the fact that monitoring of the levels of all drugs in the body is becoming increasingly important has stimulated research into rapid and efficient methods for the analysis of TMP and SMZ in biological fluids. Another consequence of the immense popularity of the combination is the appearance on the market of several generic preparations of Co-trimoxazole. It is now generally recognized that drug products from different manufacturers which are chemically equivalent may not be therapeutically equivalent. This is due to the fact that the absorption rate and/or bioavailability (extent of absorption) of a poorly soluble drug may be markedly affected by its release rate from the product and by its subsequent dissolution rate in gastrointestinal fluids. Hence bioequivalence of these various products should be established
- Full Text:
- Date Issued: 1980
- «
- ‹
- 1
- ›
- »