Resource recovery options in brewery effluent treatment using activated sludge and high rate algal ponds: assessing environmental impacts
- Authors: Taylor, Richard Peter
- Date: 2020
- Subjects: Sewage -- Purification -- Activated sludge process , Sewage disposal plants , Sewage -- Purification -- Biological treatament , Sewage -- Purification -- Nitrogen removal , Brewery waste , Breweries -- Waste disposal , Microalgae -- Biotechnology , Algal biofuels
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/153746 , vital:39507
- Description: Wastewater treatment plants (WWTPs) are designed to clean effluents, but they also consume resources and produce waste. Various treatment technologies allow for the recovery of energy, nutrients and water from effluents turning this waste into products, which increases their sustainability and decreases the impact of WWTPs on the environment. There is a lack of literature which comprehensively compares the treatment performances, environmental impacts and beneficial downstream uses of the biomass generated by high rate algal pond (HRAP) and activated sludge (AS) treatment systems. This thesis aimed to compare (1) effluent treatment performance, (2) emissions and (3) downstream use of algae cultured in HRAP to sludge produced in AS and to obtain data to conduct a life cycle analysis (LCA) to compare the systems. The focus was on adding value to the effluent treatment process, while identifying the associated environmental impacts and contributing to the first ever zero-waste brewery effluent treatment system. Furthermore, these data were used to provide a basis to critically review and contribute to improving the methods used in the LCA of effluent treatment systems; particularly since this was the first wastewater treatment LCA that compared AS and HRAP using data collected from the same temporal and geographic location and from a single effluent stream. The electrical consumption water emission and land application of waste biomass caused the major environmental impacts of both treatment systems. The HRAP had less than 50 % of the electrical energy consumption (0.11±0.01 kW/m3 of effluent treated) compared to the AS system (0.29±0.11 kW/m3) which resulted in the technology having a lower climate change, photochemical oxidant formation, freshwater and marine ecotoxicity and fossil fuel depletion impact. It is imperative to understand the method of electrical energy (fossil fuel vs renewable) generation when conducting a LCA and deciding which technologies to use, since they have a major influence on the aforementioned impacts. The biogas yield of algal and sludge substrates was similar with an average gas production of 241 ml/g volatile solids fed. Biogas from algae fed digesters had a significantly higher methane content (64.73±0.81 %) and lower carbon dioxide content (22.94±0.24 %) when compared to WAS fed digesters (60.08±0.18 % and 27.37±0.43 %) respectively due to it being a less oxidised substrate. Swiss chard plants (Beta vulgaris) fertilised with anaerobically digested (AD) algae or sludge had a significantly higher mean biweekly yield (5.08±0.73 kg/m2) when compared to the inorganic-fertiliser control (3.45±0.89 kg/m2; p<0.0001). No difference was observed in the soil’s physical fertility when algae or sludge were applied to the soil (p>0.05). The HRAP produced more biomass (317.18±27.76 g/m3) than the AS (83.12±64.91 g/m3), which resulted in a significantly greater downstream production of biogas and fertiliser per volume of effluent treated. According to the LCA, this also resulted in the HRAP system having a higher terrestrial ecotoxicity, due to the greater volume of solids and thus heavy metals applied to the soil. This interpretation can be misleading, because the mass of heavy metals released into the environment is the same for both systems, with a greater portion being applied to the land in the HRAP scenario and discharged into fresh water in the case of AS. Future LCA models should clarify if these biomasses are going to be applied to a single piece of land or multiple sites as this will influence the risk of contamination via pollutant build up in the soil. The application of sludge or algae on soil increased the soil’s sodium concentration and sodium absorption ratio from 774.80±13.66 mg/kg to 952.17±34.89 mg/kg and 2.91±0.04 to 3.53±0.13, respectively. Regulations on the application of algae or sludge on agricultural soils should be altered to consider the limit values for sodium and future LCA’s associated with effluent treatment facilities should incorporate the possibility of soil contamination through sodium build-up. This work also conceptualised the importance of reporting water emissions in wastewater treatment LCA in as much detail as possible, because this had a significant influence on the eutrophication impacts on water systems. Reporting water emissions as total nitrogen underestimated downstream eutrophication impacts compared with those using nitrogen-species concentration (ammonia, nitrite, nitrate etc). A marine eutrophication sensitivity co-efficient should be included in future LCA models which accounts for the probability of nitrogen and phosphorus emissions entering the coastal environment as well as the vulnerability of the marine environment to eutrophication. Activated sludge systems are favourable for situations where space is limited, were there are inadequate options for biomass disposal (biomass not be used in agriculture or AD) and were electricity is generated from a renewable source; whereas, HRAP are more suitable under circumstances where electricity production relies on fossil fuel that carries a high environmental impact and where options are available to use the biomass for economic gain such as biogas and fertiliser production. This thesis contributes towards a zero-waste brewery effluent treated process. The HRAP and AS treated effluent for reuse in the brewery or in agricultural irrigation. The solids were anaerobically digested, and the carbon was recovered as a biogas, while the digestate was applied as an agricultural fertiliser. This allowed for the recovery of water, nutrients and carbon.
- Full Text:
- Date Issued: 2020
- Authors: Taylor, Richard Peter
- Date: 2020
- Subjects: Sewage -- Purification -- Activated sludge process , Sewage disposal plants , Sewage -- Purification -- Biological treatament , Sewage -- Purification -- Nitrogen removal , Brewery waste , Breweries -- Waste disposal , Microalgae -- Biotechnology , Algal biofuels
- Language: English
- Type: text , Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10962/153746 , vital:39507
- Description: Wastewater treatment plants (WWTPs) are designed to clean effluents, but they also consume resources and produce waste. Various treatment technologies allow for the recovery of energy, nutrients and water from effluents turning this waste into products, which increases their sustainability and decreases the impact of WWTPs on the environment. There is a lack of literature which comprehensively compares the treatment performances, environmental impacts and beneficial downstream uses of the biomass generated by high rate algal pond (HRAP) and activated sludge (AS) treatment systems. This thesis aimed to compare (1) effluent treatment performance, (2) emissions and (3) downstream use of algae cultured in HRAP to sludge produced in AS and to obtain data to conduct a life cycle analysis (LCA) to compare the systems. The focus was on adding value to the effluent treatment process, while identifying the associated environmental impacts and contributing to the first ever zero-waste brewery effluent treatment system. Furthermore, these data were used to provide a basis to critically review and contribute to improving the methods used in the LCA of effluent treatment systems; particularly since this was the first wastewater treatment LCA that compared AS and HRAP using data collected from the same temporal and geographic location and from a single effluent stream. The electrical consumption water emission and land application of waste biomass caused the major environmental impacts of both treatment systems. The HRAP had less than 50 % of the electrical energy consumption (0.11±0.01 kW/m3 of effluent treated) compared to the AS system (0.29±0.11 kW/m3) which resulted in the technology having a lower climate change, photochemical oxidant formation, freshwater and marine ecotoxicity and fossil fuel depletion impact. It is imperative to understand the method of electrical energy (fossil fuel vs renewable) generation when conducting a LCA and deciding which technologies to use, since they have a major influence on the aforementioned impacts. The biogas yield of algal and sludge substrates was similar with an average gas production of 241 ml/g volatile solids fed. Biogas from algae fed digesters had a significantly higher methane content (64.73±0.81 %) and lower carbon dioxide content (22.94±0.24 %) when compared to WAS fed digesters (60.08±0.18 % and 27.37±0.43 %) respectively due to it being a less oxidised substrate. Swiss chard plants (Beta vulgaris) fertilised with anaerobically digested (AD) algae or sludge had a significantly higher mean biweekly yield (5.08±0.73 kg/m2) when compared to the inorganic-fertiliser control (3.45±0.89 kg/m2; p<0.0001). No difference was observed in the soil’s physical fertility when algae or sludge were applied to the soil (p>0.05). The HRAP produced more biomass (317.18±27.76 g/m3) than the AS (83.12±64.91 g/m3), which resulted in a significantly greater downstream production of biogas and fertiliser per volume of effluent treated. According to the LCA, this also resulted in the HRAP system having a higher terrestrial ecotoxicity, due to the greater volume of solids and thus heavy metals applied to the soil. This interpretation can be misleading, because the mass of heavy metals released into the environment is the same for both systems, with a greater portion being applied to the land in the HRAP scenario and discharged into fresh water in the case of AS. Future LCA models should clarify if these biomasses are going to be applied to a single piece of land or multiple sites as this will influence the risk of contamination via pollutant build up in the soil. The application of sludge or algae on soil increased the soil’s sodium concentration and sodium absorption ratio from 774.80±13.66 mg/kg to 952.17±34.89 mg/kg and 2.91±0.04 to 3.53±0.13, respectively. Regulations on the application of algae or sludge on agricultural soils should be altered to consider the limit values for sodium and future LCA’s associated with effluent treatment facilities should incorporate the possibility of soil contamination through sodium build-up. This work also conceptualised the importance of reporting water emissions in wastewater treatment LCA in as much detail as possible, because this had a significant influence on the eutrophication impacts on water systems. Reporting water emissions as total nitrogen underestimated downstream eutrophication impacts compared with those using nitrogen-species concentration (ammonia, nitrite, nitrate etc). A marine eutrophication sensitivity co-efficient should be included in future LCA models which accounts for the probability of nitrogen and phosphorus emissions entering the coastal environment as well as the vulnerability of the marine environment to eutrophication. Activated sludge systems are favourable for situations where space is limited, were there are inadequate options for biomass disposal (biomass not be used in agriculture or AD) and were electricity is generated from a renewable source; whereas, HRAP are more suitable under circumstances where electricity production relies on fossil fuel that carries a high environmental impact and where options are available to use the biomass for economic gain such as biogas and fertiliser production. This thesis contributes towards a zero-waste brewery effluent treated process. The HRAP and AS treated effluent for reuse in the brewery or in agricultural irrigation. The solids were anaerobically digested, and the carbon was recovered as a biogas, while the digestate was applied as an agricultural fertiliser. This allowed for the recovery of water, nutrients and carbon.
- Full Text:
- Date Issued: 2020
An investigation of the combustion kinetics of coal-microalgae composite
- Ejesieme, Obialo Vitus, Dugmore, Gary
- Authors: Ejesieme, Obialo Vitus , Dugmore, Gary
- Date: 2018
- Subjects: Microalgae -- Biotechnology , Biomass energy -- South Africa Coal -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/34777 , vital:33447
- Description: Coal mining and handling generate sizeable quantities of ultra-fine coal particles which are heaped as discard material. Use of the ultra-fine coal for co-firing with microalgae biomass appears to be a promising option that would improve combustion of the discard. There is no available traditional biomass binder that can be used to agglomerate, reclaim, and co-fire the discard ultra-fine coal to generate heat. In a recent research, microalgae biomass was identified as an effective natural binder for discard ultra-fine coal. Biomass is a renewable resource, and many have been co-fired on a large scale except microalgae biomass. Researchers have studied co-firing of dry mixed coal-microalgae, however, the kinetics of a wet mix of microalgae biomass and ultra-fine coal, “Coalgae®” patented recently by the Nelson Mandela University needs to be explored. The study aimed at investigating in some detail the oxidation mechanism of coal-microalgae composites. The objective is to understand the impact of microalgae on the kinetic properties of coal which will inform on the application of “Coalgae®”. It involves correlating the small and large-scale combustion properties that will establish the co-firing option on an industrial scenario. The goal is to utilize all grades of discard ultra-fine resource using microalgae biomass as binder and a renewable component which enhances the combustion of coal to supply heat and electricity. The use of microalgae for fuel preparation and upgrading is on the increase due to its high growth potential, reactivity, and ability to store energy more than other biomasses. This research hypothesized that blending of discard ultra-fine coal with live microalgae biomass would improve the kinetic properties of the coal more than expected from linear combination of the dry materials. Thermogravimetric combustion of “Coalgae®” was studied under non-isothermal conditions from 40 °C to 900°C at a heating rate of 15 °C/min and air flow rate of 20 ml/min. The thermogravimetric combustion properties i.e. small-scale was related to the large-scale, John Thompson’s fixed-bed reactor under the above condition. Thermal profiles were transformed into a differential function to reveal overlapped combustion events. The Coat-Redferns kinetic model was applied on the non-de-Ejesieme, O.V. PhD Chemistry (Research), Nelson Mandela Univ. Email: ejevit@yahoo.com , s211266744@live.nmmu.ac.za convoluted reactions set to obtain some of kinetic parameters. The Fraser-Suzuki equation was used to de-convolute the overlapped combustion. Then, rate law combined with Arrhenius equation was used to derive the activation energy E a and pre-exponential factor A, while the integral form of solid states reaction model, g (∝) was applied to deduce the oxidation mechanism. The composite formed a strong and partly renewable blend under controlled temperature conditions, unlike assorted dried biomass mixed with coal. Microalgae biomass upgraded the fuel and kinetics properties of ultra-fine coal more than what was expected from a linear combination. It released heat that promoted the oxidation mechanism of the discard coal. The main effect is that the “Coalgae®” is significantly (p = 0.0570) more reactive than the coal. The co-firing approach is partly renewable and contributes to the utilization of high and low-quality available discard ultra-fine coal. It advances the combustion of coal resources and reduces carbon dioxide, CO2 emission attributed to global warming as well as preserves the natural biomass sources. The combustion of “Coalgae® “will improve economy, environment, and health, heat, and electricity supply to the society.
- Full Text:
- Date Issued: 2018
- Authors: Ejesieme, Obialo Vitus , Dugmore, Gary
- Date: 2018
- Subjects: Microalgae -- Biotechnology , Biomass energy -- South Africa Coal -- South Africa
- Language: English
- Type: Thesis , Doctoral , PhD
- Identifier: http://hdl.handle.net/10948/34777 , vital:33447
- Description: Coal mining and handling generate sizeable quantities of ultra-fine coal particles which are heaped as discard material. Use of the ultra-fine coal for co-firing with microalgae biomass appears to be a promising option that would improve combustion of the discard. There is no available traditional biomass binder that can be used to agglomerate, reclaim, and co-fire the discard ultra-fine coal to generate heat. In a recent research, microalgae biomass was identified as an effective natural binder for discard ultra-fine coal. Biomass is a renewable resource, and many have been co-fired on a large scale except microalgae biomass. Researchers have studied co-firing of dry mixed coal-microalgae, however, the kinetics of a wet mix of microalgae biomass and ultra-fine coal, “Coalgae®” patented recently by the Nelson Mandela University needs to be explored. The study aimed at investigating in some detail the oxidation mechanism of coal-microalgae composites. The objective is to understand the impact of microalgae on the kinetic properties of coal which will inform on the application of “Coalgae®”. It involves correlating the small and large-scale combustion properties that will establish the co-firing option on an industrial scenario. The goal is to utilize all grades of discard ultra-fine resource using microalgae biomass as binder and a renewable component which enhances the combustion of coal to supply heat and electricity. The use of microalgae for fuel preparation and upgrading is on the increase due to its high growth potential, reactivity, and ability to store energy more than other biomasses. This research hypothesized that blending of discard ultra-fine coal with live microalgae biomass would improve the kinetic properties of the coal more than expected from linear combination of the dry materials. Thermogravimetric combustion of “Coalgae®” was studied under non-isothermal conditions from 40 °C to 900°C at a heating rate of 15 °C/min and air flow rate of 20 ml/min. The thermogravimetric combustion properties i.e. small-scale was related to the large-scale, John Thompson’s fixed-bed reactor under the above condition. Thermal profiles were transformed into a differential function to reveal overlapped combustion events. The Coat-Redferns kinetic model was applied on the non-de-Ejesieme, O.V. PhD Chemistry (Research), Nelson Mandela Univ. Email: ejevit@yahoo.com , s211266744@live.nmmu.ac.za convoluted reactions set to obtain some of kinetic parameters. The Fraser-Suzuki equation was used to de-convolute the overlapped combustion. Then, rate law combined with Arrhenius equation was used to derive the activation energy E a and pre-exponential factor A, while the integral form of solid states reaction model, g (∝) was applied to deduce the oxidation mechanism. The composite formed a strong and partly renewable blend under controlled temperature conditions, unlike assorted dried biomass mixed with coal. Microalgae biomass upgraded the fuel and kinetics properties of ultra-fine coal more than what was expected from a linear combination. It released heat that promoted the oxidation mechanism of the discard coal. The main effect is that the “Coalgae®” is significantly (p = 0.0570) more reactive than the coal. The co-firing approach is partly renewable and contributes to the utilization of high and low-quality available discard ultra-fine coal. It advances the combustion of coal resources and reduces carbon dioxide, CO2 emission attributed to global warming as well as preserves the natural biomass sources. The combustion of “Coalgae® “will improve economy, environment, and health, heat, and electricity supply to the society.
- Full Text:
- Date Issued: 2018
Exploring the fertiliser potential of biosolids from algae integrated wastewater treatment systems
- Authors: Mlambo, Patricia Zanele
- Date: 2014
- Subjects: Sewage disposal plants , Sewage sludge as fertilizer , Algae -- Biotechnology , Sewage -- Purification -- Anaerobic treatment , Plant regulators , Biofertilizers , Microalgae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5957 , http://hdl.handle.net/10962/d1013342
- Description: High rate algae oxidation ponds (HRAOP) for domestic wastewater treatment generate biosolids that are predominantly microalgae. Consequently, HRAOP biosolids are enriched with minerals, amino acids, nutrients and possibly contain plant growth regulator (PGR)-like substances, which makes HRAOP biosolids attractive as fertiliser or PGR. This study investigated HRAOP biosolids as a starting material for a natural, cost-effective and readily-available eco-friendly organic fertiliser and/or PGRs. Various HRAOP extract formulations were prepared and their effect on plant growth and development was evaluated using selected bioassays. Initial screening included assessing the effect on change in specific leaf area, radish cotyledon expansion as an indicator of PGR-like activity, and seed germination index (GI). More detailed studies on fertiliser efficacy and PGR-like activity utilised bean (Phaseolus vulgaris) and tomato (Solanum lycopersicum) plants. Combined effects of sonicated (S) and 40% v/v methanol (M) extract (5:1 SM) had impressive plant responses, comparable to Hoagland solution (HS). Other potentially fertiliser formulations included 0.5% M, 1% M, 2.5% S and 5% S formulations. The 5:1 SM and 5% S showed greater PGR-like activity, promoting cotyledon expansion by 459 ± 0.02% and 362 ± 0.01%, respectively. GI data showed that none of the formulations negatively impacted germination. Further investigation showed that the 5% S formulation increased leaf length, width and area by 6.69 ± 0.24, 6.21 ± 0.2 mm and 41.55 ± 0.2 mm². All formulated fertiliser extracts had no adverse effect on chlorophyll content and plant nutrient balance as indicated by C:N (8-10:1) ratio. In addition, plants appeared to actively mobilise nutrients to regions where needed as evidenced by a shift in shoot: root ratio depending on C, N and water availability. Furthermore, 5% S caused a 75% increase in tomato productivity and had no effect on bean productivity. Whereas, 5:1 SM and 1% M formulation improved bean pod production by 33.3% and 11%, respectively but did not affect tomato production. Harvest index (HI) however indicated a 3% reduction in tomato productivity with 5:1 SM and little or no enhancement in bean productivity with both 5:1 SM and 5% S treatments. Bean plants treated with 5:1 SM and 5% S produced larger fruits, which could be an indication of the presence of a PGR effect. Overall, HRAOP biosolids extracts prepared and investigated in this study demonstrated both fertiliser characteristics and PGR-like activity with performances comparable and in some cases exceeding that of commercial products. However additional research is needed to confirm presence of PGR-like activities and fertiliser efficacy.
- Full Text:
- Date Issued: 2014
- Authors: Mlambo, Patricia Zanele
- Date: 2014
- Subjects: Sewage disposal plants , Sewage sludge as fertilizer , Algae -- Biotechnology , Sewage -- Purification -- Anaerobic treatment , Plant regulators , Biofertilizers , Microalgae -- Biotechnology
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:5957 , http://hdl.handle.net/10962/d1013342
- Description: High rate algae oxidation ponds (HRAOP) for domestic wastewater treatment generate biosolids that are predominantly microalgae. Consequently, HRAOP biosolids are enriched with minerals, amino acids, nutrients and possibly contain plant growth regulator (PGR)-like substances, which makes HRAOP biosolids attractive as fertiliser or PGR. This study investigated HRAOP biosolids as a starting material for a natural, cost-effective and readily-available eco-friendly organic fertiliser and/or PGRs. Various HRAOP extract formulations were prepared and their effect on plant growth and development was evaluated using selected bioassays. Initial screening included assessing the effect on change in specific leaf area, radish cotyledon expansion as an indicator of PGR-like activity, and seed germination index (GI). More detailed studies on fertiliser efficacy and PGR-like activity utilised bean (Phaseolus vulgaris) and tomato (Solanum lycopersicum) plants. Combined effects of sonicated (S) and 40% v/v methanol (M) extract (5:1 SM) had impressive plant responses, comparable to Hoagland solution (HS). Other potentially fertiliser formulations included 0.5% M, 1% M, 2.5% S and 5% S formulations. The 5:1 SM and 5% S showed greater PGR-like activity, promoting cotyledon expansion by 459 ± 0.02% and 362 ± 0.01%, respectively. GI data showed that none of the formulations negatively impacted germination. Further investigation showed that the 5% S formulation increased leaf length, width and area by 6.69 ± 0.24, 6.21 ± 0.2 mm and 41.55 ± 0.2 mm². All formulated fertiliser extracts had no adverse effect on chlorophyll content and plant nutrient balance as indicated by C:N (8-10:1) ratio. In addition, plants appeared to actively mobilise nutrients to regions where needed as evidenced by a shift in shoot: root ratio depending on C, N and water availability. Furthermore, 5% S caused a 75% increase in tomato productivity and had no effect on bean productivity. Whereas, 5:1 SM and 1% M formulation improved bean pod production by 33.3% and 11%, respectively but did not affect tomato production. Harvest index (HI) however indicated a 3% reduction in tomato productivity with 5:1 SM and little or no enhancement in bean productivity with both 5:1 SM and 5% S treatments. Bean plants treated with 5:1 SM and 5% S produced larger fruits, which could be an indication of the presence of a PGR effect. Overall, HRAOP biosolids extracts prepared and investigated in this study demonstrated both fertiliser characteristics and PGR-like activity with performances comparable and in some cases exceeding that of commercial products. However additional research is needed to confirm presence of PGR-like activities and fertiliser efficacy.
- Full Text:
- Date Issued: 2014
Co-utilisation of microalgae for wastewater treatment and the production of animal feed supplements
- Authors: Johnson, Hailey E
- Date: 2011
- Subjects: Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3940 , http://hdl.handle.net/10962/d1003999 , Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Description: Microalgae have a variety of commercial applications, the oldest of which include utilisation as a food source and for use in wastewater treatment. These applications, however, are seldom combined due to toxicity concerns, for ethical reasons, and generally the requirement for cultivation of a single algae species for use as a feed supplement. These problems might be negated if a “safer” wastewater such as that from agricultural and/or commercial food production facilities were to be utilised and if a stable algae population can be maintained. In this investigation preliminary studies were carried out using an Integrated Algae Pond System (IAPS) for domestic wastewater treatment to determine the species composition in the associated High Rate Algae Ponds (HRAPs). The effect of different modes of operation, continuous versus batch, on nutrient removal, productivity and species composition was also investigated. Furthermore, indigenous species in the HRAP were isolated and molecularly identified as, Chlorella, Micractinium, Scenedesmus and Pediastrum. Additionally, the effect of the nor amino acid, 2-hydroxy-4-(methylthio)-butanoic acid (HMTBA) and its Cu-chelated derivative, on the growth and biochemical composition of Chlorella, Micractinium, Scenedesmus, Pediastrum and Spirulina was investigated. Species composition in the HRAP was stable under continuous operation with Micractinium dominating > 90% of the algae population. Under batch operation the population dynamic shifted; Chlorella outcompeted Micractinium possibly due to nutrient depletion and selective grazing pressures caused by proliferation of Daphnia. Higher species diversity was observed during batch mode as slower growing algae were able to establish in the HRAP. Nutrient removal efficiency and biomass productivity was higher in continuous mode, however lower nutrient levels were obtained in batch operation. HMTBA did not significantly affect growth rate, however treatment with 10 mg.L-1 resulted in slightly increased growth rate in Micractinium and increased final biomass concentrations in Chlorella, Micractinium and Spirulina (although this was not statistically significant for Micractinium and Spirulina), which are known mixotrophic species. Algae treated with Cu-HMTBA, showed reduced final biomass concentration with 10 mg.L-1, caused by Cu toxicity. Biochemical composition of the algae was species-specific and differed through the growth cycle, with high protein observed during early growth and high carbohydrate during late growth/early stationary phase. Additionally, 0.1 mg.L-1 HMTBA and Cu-HMTBA significantly reduced protein content in Chlorella, Micractinium, Scenedesmus and Pediastrum. In conclusion, operation of the HRAP in continuous culture provided suitable wastewater treatment with high productivity of an ideal species, Micractinium, for use in animal feed supplementation. This species had 40% protein content during growth (higher than the other species tested) and dominated the HRAP at > 90% of the algae population during continuous mode. Addition of HMTBA (> 1 mg.L-1) to algae cultivation systems and those treating wastewater, has the potential to improve productivity and the value of the biomass by enhancing protein content. Overall, the co-utilisation of microalgae for wastewater treatment and the generation of a biomass rich in protein, for incorporation into formulated animal feed supplements, represents a closed ecosystem which conserves nutrients and regenerates a most valuable resource, water.
- Full Text:
- Date Issued: 2011
- Authors: Johnson, Hailey E
- Date: 2011
- Subjects: Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Language: English
- Type: Thesis , Masters , MSc
- Identifier: vital:3940 , http://hdl.handle.net/10962/d1003999 , Microalgae -- Biotechnology , Algae culture , Algae products , Waste products as feed , Sewage -- Purification , Organic wastes -- Recycling , Food industry and trade -- Waste disposal , Agriculture -- Waste disposal
- Description: Microalgae have a variety of commercial applications, the oldest of which include utilisation as a food source and for use in wastewater treatment. These applications, however, are seldom combined due to toxicity concerns, for ethical reasons, and generally the requirement for cultivation of a single algae species for use as a feed supplement. These problems might be negated if a “safer” wastewater such as that from agricultural and/or commercial food production facilities were to be utilised and if a stable algae population can be maintained. In this investigation preliminary studies were carried out using an Integrated Algae Pond System (IAPS) for domestic wastewater treatment to determine the species composition in the associated High Rate Algae Ponds (HRAPs). The effect of different modes of operation, continuous versus batch, on nutrient removal, productivity and species composition was also investigated. Furthermore, indigenous species in the HRAP were isolated and molecularly identified as, Chlorella, Micractinium, Scenedesmus and Pediastrum. Additionally, the effect of the nor amino acid, 2-hydroxy-4-(methylthio)-butanoic acid (HMTBA) and its Cu-chelated derivative, on the growth and biochemical composition of Chlorella, Micractinium, Scenedesmus, Pediastrum and Spirulina was investigated. Species composition in the HRAP was stable under continuous operation with Micractinium dominating > 90% of the algae population. Under batch operation the population dynamic shifted; Chlorella outcompeted Micractinium possibly due to nutrient depletion and selective grazing pressures caused by proliferation of Daphnia. Higher species diversity was observed during batch mode as slower growing algae were able to establish in the HRAP. Nutrient removal efficiency and biomass productivity was higher in continuous mode, however lower nutrient levels were obtained in batch operation. HMTBA did not significantly affect growth rate, however treatment with 10 mg.L-1 resulted in slightly increased growth rate in Micractinium and increased final biomass concentrations in Chlorella, Micractinium and Spirulina (although this was not statistically significant for Micractinium and Spirulina), which are known mixotrophic species. Algae treated with Cu-HMTBA, showed reduced final biomass concentration with 10 mg.L-1, caused by Cu toxicity. Biochemical composition of the algae was species-specific and differed through the growth cycle, with high protein observed during early growth and high carbohydrate during late growth/early stationary phase. Additionally, 0.1 mg.L-1 HMTBA and Cu-HMTBA significantly reduced protein content in Chlorella, Micractinium, Scenedesmus and Pediastrum. In conclusion, operation of the HRAP in continuous culture provided suitable wastewater treatment with high productivity of an ideal species, Micractinium, for use in animal feed supplementation. This species had 40% protein content during growth (higher than the other species tested) and dominated the HRAP at > 90% of the algae population during continuous mode. Addition of HMTBA (> 1 mg.L-1) to algae cultivation systems and those treating wastewater, has the potential to improve productivity and the value of the biomass by enhancing protein content. Overall, the co-utilisation of microalgae for wastewater treatment and the generation of a biomass rich in protein, for incorporation into formulated animal feed supplements, represents a closed ecosystem which conserves nutrients and regenerates a most valuable resource, water.
- Full Text:
- Date Issued: 2011
- «
- ‹
- 1
- ›
- »