The use of lean tools to increase productivity and improve efficiency in Port Elizabeth Enforcement Audit
- Authors: Bantom, Phumeza Patience
- Date: 2011
- Subjects: Lean manufacturing , Quality control -- Auditing , Waste minimization , Auditing, Internal
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:8645 , http://hdl.handle.net/10948/d1008159 , Lean manufacturing , Quality control -- Auditing , Waste minimization , Auditing, Internal
- Description: Lean philosophy is based on the continuous quest to improve the organisation‟s processes by creating a culture and operating principles which eliminate all non value adding activities within organisation„s processes. Manufacturing firms consider the adoption of the Lean tools as basic requirements for achieving World Class operational excellence or Best Practice. For some time, lean has been used by the manufacturing organizations. Most organizations understand that lean will help them survive global competition and stay in business. The objective of this study is to investigate how lean manufacturing tools can be used to improve efficiency and enhance the embedding of a continuous improvement culture in the South African Revenue Service Enforcement Audit Port Elizabeth. The activities that took place in Enforcement Audit Port Elizabeth from September 2010 until 31 October 2011 were observed. During the study, an introductory presentation by the researcher was made to Regional Enforcement Management and staff in general, the presentation was to introduce the study highlighting different Lean tools. Thereafter the Port Elizabeth audit staff members were engaged formally, using surveys to assess their underlying mindset and behaviour as well as informally, using unstructured interviews to solicit more information on activities taking place and the reasoning behind certain actions. The results of the survey and observations are analysed and interpreted.
- Full Text:
- Date Issued: 2011
- Authors: Bantom, Phumeza Patience
- Date: 2011
- Subjects: Lean manufacturing , Quality control -- Auditing , Waste minimization , Auditing, Internal
- Language: English
- Type: Thesis , Masters , MBA
- Identifier: vital:8645 , http://hdl.handle.net/10948/d1008159 , Lean manufacturing , Quality control -- Auditing , Waste minimization , Auditing, Internal
- Description: Lean philosophy is based on the continuous quest to improve the organisation‟s processes by creating a culture and operating principles which eliminate all non value adding activities within organisation„s processes. Manufacturing firms consider the adoption of the Lean tools as basic requirements for achieving World Class operational excellence or Best Practice. For some time, lean has been used by the manufacturing organizations. Most organizations understand that lean will help them survive global competition and stay in business. The objective of this study is to investigate how lean manufacturing tools can be used to improve efficiency and enhance the embedding of a continuous improvement culture in the South African Revenue Service Enforcement Audit Port Elizabeth. The activities that took place in Enforcement Audit Port Elizabeth from September 2010 until 31 October 2011 were observed. During the study, an introductory presentation by the researcher was made to Regional Enforcement Management and staff in general, the presentation was to introduce the study highlighting different Lean tools. Thereafter the Port Elizabeth audit staff members were engaged formally, using surveys to assess their underlying mindset and behaviour as well as informally, using unstructured interviews to solicit more information on activities taking place and the reasoning behind certain actions. The results of the survey and observations are analysed and interpreted.
- Full Text:
- Date Issued: 2011
Optimization of a manufacturing process for atrazine with a focus on waste minimization
- Authors: Mtyopo, Mteteleli Bethwell
- Date: 2004
- Subjects: Waste minimization , Atrazine -- Environmental aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10976 , http://hdl.handle.net/10948/259 , Waste minimization , Atrazine -- Environmental aspects
- Description: Chemical synthesis is not complete without waste treatment. There is no chemical process that does not produce waste. The untreated effluent discharged by chemical industries poses a major environmental concern. This dissertation describes the results of an investigation carried out on the formation of by-products (impurities) during the synthesis of atrazine by neutralization of the reaction mixture during the actual synthesis procedure, and prior to disposal using carbon dioxide or hydrochloric acid. The main objectives for the said investigation were: {u100083} To optimise the reaction parameters to obtain a higher yield and purity of atrazine. {u100083} To evaluate the use of carbon dioxide and hydrochloric acid to neutralise the reaction mixture. {u100083} To study the solids present in the effluent. Synthetic reactions were carried out in the presence of an organic solvent, methyl isobutyl ketone (MIBK). The synthesis of atrazine was optimised in terms of addition sequence and rates of amine reagents and base (proton acceptor) additions by means of bench scale reactions. It was found that addition of a neutralising step (hydrochloric acid or carbon dioxide) to neutralise the basic reaction mixture prior to and after addition of the secondary amine and the base minimizes the formation of by-products. Of particular importance in ensuring high yields and selectivity to the atrazine product was temperature control, pH control, reagent ratios, addition rates and mixing. The latter was important in view of the rapid reaction of amine/NaOH with cyanuric chloride, as well as the possible reaction of mono-i, the reaction intermediate, with IPA in cases of excesses of reagent. Under optimum conditions, an atrazine composition of >97% was achieved where the resultant product was well within stipulated product specifications.
- Full Text:
- Date Issued: 2004
- Authors: Mtyopo, Mteteleli Bethwell
- Date: 2004
- Subjects: Waste minimization , Atrazine -- Environmental aspects
- Language: English
- Type: Thesis , Masters , MTech
- Identifier: vital:10976 , http://hdl.handle.net/10948/259 , Waste minimization , Atrazine -- Environmental aspects
- Description: Chemical synthesis is not complete without waste treatment. There is no chemical process that does not produce waste. The untreated effluent discharged by chemical industries poses a major environmental concern. This dissertation describes the results of an investigation carried out on the formation of by-products (impurities) during the synthesis of atrazine by neutralization of the reaction mixture during the actual synthesis procedure, and prior to disposal using carbon dioxide or hydrochloric acid. The main objectives for the said investigation were: {u100083} To optimise the reaction parameters to obtain a higher yield and purity of atrazine. {u100083} To evaluate the use of carbon dioxide and hydrochloric acid to neutralise the reaction mixture. {u100083} To study the solids present in the effluent. Synthetic reactions were carried out in the presence of an organic solvent, methyl isobutyl ketone (MIBK). The synthesis of atrazine was optimised in terms of addition sequence and rates of amine reagents and base (proton acceptor) additions by means of bench scale reactions. It was found that addition of a neutralising step (hydrochloric acid or carbon dioxide) to neutralise the basic reaction mixture prior to and after addition of the secondary amine and the base minimizes the formation of by-products. Of particular importance in ensuring high yields and selectivity to the atrazine product was temperature control, pH control, reagent ratios, addition rates and mixing. The latter was important in view of the rapid reaction of amine/NaOH with cyanuric chloride, as well as the possible reaction of mono-i, the reaction intermediate, with IPA in cases of excesses of reagent. Under optimum conditions, an atrazine composition of >97% was achieved where the resultant product was well within stipulated product specifications.
- Full Text:
- Date Issued: 2004
- «
- ‹
- 1
- ›
- »